修复你的物品 社区 商店

Philips Emerson CoughAssist CA Series Disassembly

医疗设备
ifixit 或本维修指南均未获得医疗设备制造商的认可或与任何制造商存在附属关系。

简介

If your CoughAssist ventilator is acting up and not working correctly, the first step to replacing parts is always disassembling the main unit. This guide will allow you to start repairing almost any part within the ventilator.

你所需要的

  1. Philips Emerson CoughAssist CA Series Disassembly, Philips Emerson CoughAssist CA Series Disassembly: 步骤 1 中的图像 1，1

    • First, remove the two 16mm pan head screws (1) directly under the front panel of the ventilator. (Page 3).

    编辑

    • Next, remove the two 16mm flat head screws (3) from the back panel of the ventilator. (Page 3).

    编辑

    • Lift off the top cover (2) of the device. (Page 3).

    编辑

  4. Philips Emerson CoughAssist CA Series Disassembly: 步骤 4 中的图像 1，2 Philips Emerson CoughAssist CA Series Disassembly: 步骤 4 中的图像 2，2

    • Now remove the "Inhale flow" control knob (4) and "Inhale pressure" knob (4), by loosening the setscrew on each before pulling off. If you have a CM model, carefully remove the Manual Control Lever (3) by prying it off with the screwdriver. (Page 3).

    编辑

  5. Philips Emerson CoughAssist CA Series Disassembly: 步骤 5 中的图像 1，1

    • Unscrew the three 12.7mm plastite screws ( 2) holding the panel assembly to the lower housing. A long Phillips screwdriver is very helpful for access to the three screws. (Page 3)

    编辑

    • The front control panel (5) should now be loose. Carefully slide it forwards to remove. (Page 4).

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

Zachary Stednitz

于04/07/20注册

292 声望

创作了2篇指南

徽章: 5

+ 2更多徽章

团队

Cal Poly, Team S11-G18, Paton Spring 2020 Cal Poly, Team S11-G18, Paton Spring 2020 的会员

CPSU-PATON-S20S11G18

3 名成员

创作了3篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 1

总计 226