跳转到主内容

Philips DC320 37 LCD Screen Replacement

你所需要的

  1. Philips DC320 37 LCD Screen Replacement, Docking entertainment system: 步骤 1 中的图像 1,1
    • Pry off the four white feet with the pointed end of the spudger

  2. Philips DC320 37 LCD Screen Replacement: 步骤 2 中的图像 1,1
    • Gently unscrew the four 15.5 mm Phillips #2 screws that hold the bottom panel to the dock.

  3. Philips DC320 37 LCD Screen Replacement: 步骤 3 中的图像 1,1
    • Use the flat end of the spudger to pry the lid off from the two connectors holding it to the body of the dock.

    • The connectors on the panel are fragile and may break.

  4. Philips DC320 37 LCD Screen Replacement: 步骤 4 中的图像 1,3 Philips DC320 37 LCD Screen Replacement: 步骤 4 中的图像 2,3 Philips DC320 37 LCD Screen Replacement: 步骤 4 中的图像 3,3
    • Carefully pull up and out the four electrical connectors and two ribbon connectors that connect the bottom panel to the dock.

    • Electrical Connectors

    • Ribbon Connectors

    • The cables do not have a lot of slack in them. Be careful not to break the connectors.

    • One wire is soldered onto the bottom panel. Be careful not to break this bond.

  5. Philips DC320 37 LCD Screen Replacement, Speaker: 步骤 5 中的图像 1,1
    • Unscrew the two 6 mm Phillips #00 screws attaching the back panel to device.

  6. Philips DC320 37 LCD Screen Replacement: 步骤 6 中的图像 1,3 Philips DC320 37 LCD Screen Replacement: 步骤 6 中的图像 2,3 Philips DC320 37 LCD Screen Replacement: 步骤 6 中的图像 3,3
    • Slide the back panel towards top of the device and lift away from the device to detach back panel.

  7. Philips DC320 37 LCD Screen Replacement: 步骤 7 中的图像 1,1
    • Unscrew the four 16 mm Phillips #2 screws attaching the speaker unit to device.

  8. Philips DC320 37 LCD Screen Replacement: 步骤 8 中的图像 1,2 Philips DC320 37 LCD Screen Replacement: 步骤 8 中的图像 2,2
    • Slide the speaker towards the bottom of the device to remove.

  9. Philips DC320 37 LCD Screen Replacement, LCD Screen: 步骤 9 中的图像 1,3 Philips DC320 37 LCD Screen Replacement, LCD Screen: 步骤 9 中的图像 2,3 Philips DC320 37 LCD Screen Replacement, LCD Screen: 步骤 9 中的图像 3,3
    • Unscrew the seven 6 mm Phillips #00 screws holding the grey side piece to the black front panel.

    • Five of the Phillips #00 screws are on the LCD board. The other two are on the dock's bottom circuit board.

    • Unscrew the two 8 mm Phillips #1 screws that go through the grey piece and the LCD motherboard.

  10. Philips DC320 37 LCD Screen Replacement: 步骤 10 中的图像 1,1
    • Remove the ribbon cable from the ZIF connector by pulling out the two black tabs with the pointed end of the spudger then pulling the cable straight out of the connector.

  11. Philips DC320 37 LCD Screen Replacement: 步骤 11 中的图像 1,2 Philips DC320 37 LCD Screen Replacement: 步骤 11 中的图像 2,2
    • Remove the grey side piece from the black front panel by pulling it straight up. It should easily slide off.

  12. Philips DC320 37 LCD Screen Replacement: 步骤 12 中的图像 1,2 Philips DC320 37 LCD Screen Replacement: 步骤 12 中的图像 2,2
    • Unscrew the six 8 mm Phillips #1 screws holding the LCD screen to the black front panel.

    • Unscrew the two 6 mm Phillips #00 screws from the top of the panel holding the the LCD screen to the front panel.

    • Pull the LCD and circuit board off of the front panel.

结论

To reassemble your device, follow these instructions in reverse order.

Greg Lane

于04/16/13注册

39 声望

创作了4篇指南

团队

Cal Poly, Team 3-48, Amido Spring 2013 Cal Poly, Team 3-48, Amido Spring 2013 的会员

CPSU-AMIDO-S13S3G48

4 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 2

总计 1,497