跳转到主内容

Philips BiPAP S/T Blower Replacement

医疗设备
ifixit 或本维修指南均未获得医疗设备制造商的认可或与任何制造商存在附属关系。

你所需要的

视频概述

  1. Philips BiPAP S/T Blower  Replacement, Blower: 步骤 1 中的图像 1,1
    • Remove the UI Knob by pulling it straight out.

  2. Philips BiPAP S/T Blower  Replacement: 步骤 2 中的图像 1,1
    • Remove the top cover by using a Torx T15 to remove the 2 screws on the back of the enclosure.

  3. Philips BiPAP S/T Blower  Replacement: 步骤 3 中的图像 1,1
    • Remove the Main PCA by removing the wiring harnesses and squeezing the 2 standoffs in the corners of the board.

  4. Philips BiPAP S/T Blower  Replacement: 步骤 4 中的图像 1,1
    • Remove the Blower Cap by using the T8 Torx screwdriver to remove the 7 screws that secure the Cap to the enclosure.

    • Lift the Blower Assembly out of the blower housing.

    • Remove the blower Outlet Bellows from the blower assembly.

    • Place the New outlet bellows onto the blower assembly.

  5. Philips BiPAP S/T Blower  Replacement: 步骤 7 中的图像 1,1
    • Align the stands located on the bottom of the blower assembly with the holes in the blower housing.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

团队

Cal Poly, Team S7-G3, Paton Spring 2020 Cal Poly, Team S7-G3, Paton Spring 2020 的会员

CPSU-PATON-S20S7G3

3 名成员

创作了3篇指南

一条评论

this was super helpful. i yanked a working motor/blower from a slightly older system one unit that had a dead humidifier circuit(found it had melted the connector inside) and moved it to my newer bipap unit. works great, dead silent. mine had bad bearings…so loud. great article. thank you for saving me money, time…..SLEEP!

Jon Harmon - 回复

添加评论

浏览统计数据:

过去 24 小时: 3

过去 7 天: 9

过去 30 天: 27

总计 2,741