修复你的物品 社区 商店

Petnet SmartFeeder SF10E 12 Pin Connector Replacement

简介

Use this guide to replace your 12 pin connector if it is damaged and does not charge properly. When replacing the component, use a Phillips #1 screwdriver and iFixit Opening Tools to proceed with the replacement.

你所需要的

  1. Petnet SmartFeeder SF10E 12 Pin Connector Replacement, 12 Pin Connector: 步骤 1 中的图像 1，3 Petnet SmartFeeder SF10E 12 Pin Connector Replacement, 12 Pin Connector: 步骤 1 中的图像 2，3 Petnet SmartFeeder SF10E 12 Pin Connector Replacement, 12 Pin Connector: 步骤 1 中的图像 3，3

    • Eject the SmartBowl by pressing the button located at the front of the SmartFeeder base.

    编辑

  2. Petnet SmartFeeder SF10E 12 Pin Connector Replacement: 步骤 2 中的图像 1，3 Petnet SmartFeeder SF10E 12 Pin Connector Replacement: 步骤 2 中的图像 2，3 Petnet SmartFeeder SF10E 12 Pin Connector Replacement: 步骤 2 中的图像 3，3

    • Remove the food tub by twisting it counter-clockwise with both hands and lifting it up.

    编辑

  3. Petnet SmartFeeder SF10E 12 Pin Connector Replacement: 步骤 3 中的图像 1，1

    • Remove the black plastic gasket from the top of the SmartFeeder by placing your fingers on the side of it and lifting up.

    • It should come off easily.

    编辑

  5. Petnet SmartFeeder SF10E 12 Pin Connector Replacement: 步骤 4 中的图像 1，1

    • Flip over the SmartFeeder by using both hands.

    • Partially open the outer case of the SmartFeeder by wedging an iFixit Opening Tool on each side.

    编辑

  6. Petnet SmartFeeder SF10E 12 Pin Connector Replacement: 步骤 5 中的图像 1，2 Petnet SmartFeeder SF10E 12 Pin Connector Replacement: 步骤 5 中的图像 2，2

    • Turn the SmartFeeder on its side and with one hand on the base, carefully pull out the central section.

    • Place the bottom piece of the device right-side up.

    编辑

  7. Petnet SmartFeeder SF10E 12 Pin Connector Replacement: 步骤 6 中的图像 1，2 Petnet SmartFeeder SF10E 12 Pin Connector Replacement: 步骤 6 中的图像 2，2

    • Remove one 10 mm screw by using the Phillips #1 screwdriver.

    • Remove the plastic retaining piece for the daughterboard by pulling it out with one hand.

    编辑

  8. Petnet SmartFeeder SF10E 12 Pin Connector Replacement: 步骤 7 中的图像 1，3 Petnet SmartFeeder SF10E 12 Pin Connector Replacement: 步骤 7 中的图像 2，3 Petnet SmartFeeder SF10E 12 Pin Connector Replacement: 步骤 7 中的图像 3，3

    • Pull the daughterboard out of the device and remove the three-prong connectors by using your hands.

    • Hold onto the sockets on the motherboard or you could accidentally pull off the entire assembly.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

Ashley Kim

于10/08/18注册

187 声望

撰写一个指南

徽章: 6

+ 3更多徽章

团队

Cal Poly, Team S13-G7, White Fall 2018 Cal Poly, Team S13-G7, White Fall 2018 的会员

CPSU-WHITE-F18S13G7

4 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 287