修复你的物品 社区 商店

Pentax Optio WG-3 GPS Lens Assembly Replacement

简介

If your Pentax Optio WG-3 GPS camera photos are not clear, will not focus, or the photos are distorted, refer to this guide to replace the lens assembly. When handling the orange ribbon cables use extreme caution to not pull on them because these cables are extremely fragile.

Before starting, be sure the device is fully powered off and be sure to remove the battery.

你所需要的

  1. Pentax Optio WG-3 GPS Lens Assembly Replacement, Lens Assembly: 步骤 1 中的图像 1，1

    • Turn over the camera so the screen is facing up.

    • Remove the four 5 mm Phillips #000 screws that secure the outer cover.

    编辑

  2. Pentax Optio WG-3 GPS Lens Assembly Replacement: 步骤 2 中的图像 1，1

    • Flip over the camera so the bottom is facing up.

    • Remove the single Phillips #000 screw.

    • Remove the cover.

    编辑

  3. Pentax Optio WG-3 GPS Lens Assembly Replacement: 步骤 3 中的图像 1，1

    • Remove the eight 5 mm Phillips #000 screws holding the circuitry together.

    编辑

  5. Pentax Optio WG-3 GPS Lens Assembly Replacement: 步骤 4 中的图像 1，1

    • Carefully remove the circuitry.

    编辑

  6. Pentax Optio WG-3 GPS Lens Assembly Replacement: 步骤 5 中的图像 1，1

    • Flip the circuitry so that the lens is facing up and the flash component is on your right.

    • Identify the orange ribbon tape surrounding the lens.

    编辑

  7. Pentax Optio WG-3 GPS Lens Assembly Replacement: 步骤 6 中的图像 1，1

    • There are three 5 mm Phillips #000 screws to be removed on the right side of the lens.

    编辑

  8. Pentax Optio WG-3 GPS Lens Assembly Replacement: 步骤 7 中的图像 1，1

    • Gently slide the lens piece to the right, remove the tape and take it out.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与2其他贡献者

Garrett Rose

于03/31/22注册

373 声望

创作了2篇指南

徽章: 4

+1个徽章

团队

IUPUI, Team 3-1, Harley Spring 2022 IUPUI, Team 3-1, Harley Spring 2022 的会员

IUPUI-HARLEY-S22S3G1

3 名成员

创作了3篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 4

总计 179