跳转到主内容

修复你的物品

维修的权力

商店

简介

The Pebble Time comes equipped with a spring loaded rubber strap. This guide will show the steps necessary to remove the strap for replacement with any 22mm spring loaded strap.

配件

没有特定配件。

  1. Locate the spring latch components on the back of the watch strap.
    • Locate the spring latch components on the back of the watch strap.

  2. Insert the metal spudger tool into the outer edge of the latch component. Hold the watch securely and press the spring latch component towards you with the metal spudger tool.
    • Insert the metal spudger tool into the outer edge of the latch component.

    • Hold the watch securely and press the spring latch component towards you with the metal spudger tool.

  3. Remove the strap from the watch. Repeat all steps on the opposite strap.
    • Remove the strap from the watch.

    • Repeat all steps on the opposite strap.

结论

To reassemble your device, follow these instructions in reverse order.

Nicolas Hempe

于2017年02月15日注册

1,092 信誉积分

创作了5篇指南

团队

USF Tampa, Team 1-3, Sullivan Spring 2017 USF Tampa, Team 1-3, Sullivan Spring 2017 的会员

USFT-SULLIVAN-S17S1G3

4 名成员

创作了7篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 5

总计 208