跳转到主内容

Patch your Patagonia Nano Puff ® Jacket with Repair Tape

你所需要的

  1. Patch your Patagonia Nano Puff ® Jacket with Repair Tape, Patch your Patagonia Nano Puff ® Jacket with Repair Tape: 步骤 1 中的图像 1,1
    • Inspect the damage on your jacket. Clip any dangling threads or fabric using small scissors.

  2. Patch your Patagonia Nano Puff ® Jacket with Repair Tape: 步骤 2 中的图像 1,3 Patch your Patagonia Nano Puff ® Jacket with Repair Tape: 步骤 2 中的图像 2,3 Patch your Patagonia Nano Puff ® Jacket with Repair Tape: 步骤 2 中的图像 3,3
    • Grab your repair tape.

    • Flip the repair tape to the back side.

    • Using a permanent marker, draw an oval slightly larger than the hole.

    • If you have a wide hole, you can use a rectangle, but be sure to round the edges. Rounding the edges prevents the corners from getting caught and peeling up.

  3. Patch your Patagonia Nano Puff ® Jacket with Repair Tape: 步骤 3 中的图像 1,2 Patch your Patagonia Nano Puff ® Jacket with Repair Tape: 步骤 3 中的图像 2,2
    • Cut out your shape using scissors.

  4. Patch your Patagonia Nano Puff ® Jacket with Repair Tape: 步骤 4 中的图像 1,3 Patch your Patagonia Nano Puff ® Jacket with Repair Tape: 步骤 4 中的图像 2,3 Patch your Patagonia Nano Puff ® Jacket with Repair Tape: 步骤 4 中的图像 3,3
    • Using your fingernail, or a pin, peel the backing off the tenacious tape, so that you only have the clear sticky layer.

    • Be sure not to touch the sticky side of the tape as this will gum up the tape and it won’t stick well.

  5. Patch your Patagonia Nano Puff ® Jacket with Repair Tape: 步骤 5 中的图像 1,2 Patch your Patagonia Nano Puff ® Jacket with Repair Tape: 步骤 5 中的图像 2,2
    • Lay the tape over the hole and press the tape down with your finger.

  6. Patch your Patagonia Nano Puff ® Jacket with Repair Tape: 步骤 6 中的图像 1,2 Patch your Patagonia Nano Puff ® Jacket with Repair Tape: 步骤 6 中的图像 2,2
    • Use a fingernail or spudger to work out all of the air bubbles under the tape. Continue rubbing the tape until it is well-adhered.

终点

9等其他人完成本指南。

Brittany McCrigler

于03/05/12注册

88,901 声望

创作了131篇指南

团队

iFixit iFixit 的会员

Staff

135 名成员

创作了16,475篇指南

2条评论

I followed this tutorial and used Tenacious tape by Gear Aid because it claims to not leave a residue behind if removed. That was a bad idea. I am now ready to upgrade this patch to a sewn one and removing the tape is absolutely leaving behind a residue. Really annoyed right now.

Ling Wang - 回复

This is really helpful, thanks.

James

James Riley - 回复

添加评论

浏览统计数据:

过去 24 小时: 9

过去 7 天: 50

过去 30 天: 198

总计 45,096