Parrot Hydrofoil Orak Lever Arm Replacement

简介

This guide will detail the process for removing the lever arm on the hydrofoil boat. If the lever arm won't raise when the drone is powered on or is broken, you may need to use this guide to access and remove the lever arm.

你所需要的

步骤 1 Rudder

Parrot Hydrofoil Orak Lever Arm Replacement, Rudder: 步骤 1 中的图像 1，1

Place the boat so that the front faces to the right.

编辑

步骤 2

Remove the far left 1cm screw using a T8 screwdriver.

编辑

步骤 3

Remove the rudder.

编辑

步骤 4 Lever Arm

Parrot Hydrofoil Orak Lever Arm Replacement, Lever Arm: 步骤 4 中的图像 1，3

Parrot Hydrofoil Orak Lever Arm Replacement, Lever Arm: 步骤 4 中的图像 2，3

Parrot Hydrofoil Orak Lever Arm Replacement, Lever Arm: 步骤 4 中的图像 3，3

Remove the four remaining 1cm screws with the T8 screw driver.

编辑

步骤 5

Lift up on the plastic piece that is securing the lever arm.

编辑

步骤 6

Flip the plastic part upside down to reveal where the lever arm sits.

编辑

步骤 7

Parrot Hydrofoil Orak Lever Arm Replacement: 步骤 7 中的图像 3，3

Lift the lever arm from the slot it is in and slide off of the end of the plastic piece that was holding it to the boat.

编辑

结论

To reassemble your device, follow these instructions in reverse order.

作者

与1其他贡献者

Justin Connerly

于10/06/16注册

273 声望

创作了2篇指南

徽章: 9

+ 6更多徽章

团队

Cal Poly, Team 20-2, Livingston Fall 2016 Cal Poly, Team 20-2, Livingston Fall 2016 的会员

CPSU-LIVINGSTON-F16S20G2

4 名成员

创作了5篇指南

Parrot Hydrofoil Orak Lever Arm Replacement

简介

你所需要的

步骤 1 Rudder

添加评论

步骤 2

添加评论

步骤 3

添加评论

步骤 4 Lever Arm

添加评论

步骤 5

添加评论

步骤 6

添加评论

步骤 7

添加评论

作者

Justin Connerly

团队

Cal Poly, Team 20-2, Livingston Fall 2016 Cal Poly, Team 20-2, Livingston Fall 2016 的会员

0条评论

添加评论

嵌入本指南

预览