修复你的物品 社区 商店

Parrot FLYPAD Joystick Replacement

简介

This guide will walk you through steps to replace your joystick.

你所需要的

  1. Parrot FLYPAD Joystick Replacement, Joystick: 步骤 1 中的图像 1，1
    在这个步骤中使用的工具：
    Magnetic Project Mat
    $19.95
    购买

    • Total of 6 Screws are located in the back of the controller.

    • Four 0.9mm T6 screws

    • Two 0.1mm T6 screws

    • Flip the Flypad over.

    • Remove the six screws using a T6 screwdriver.

    • Use a Magnetic Mat to prevent loss of screws. Set aside.

    编辑

  2. Parrot FLYPAD Joystick Replacement: 步骤 2 中的图像 1，1

    • Flip the Flypad over again and separate the front and back. Be sure to remove the foam adhesive that connects the front plate to the motherboard.

    • Be aware that the Buttons (L1,R1) may fall out. Remember to put them back in place during reassembly.

    • Use Ph0 tool to remove the screws holding the motherboard in place.

    • Gently remove the motherboard from the front plate.

    编辑

  4. Parrot FLYPAD Joystick Replacement: 步骤 3 中的图像 1，2 Parrot FLYPAD Joystick Replacement: 步骤 3 中的图像 2，2

    • Pop the joysticks out by pulling gently.

    编辑

  5. Parrot FLYPAD Joystick Replacement: 步骤 4 中的图像 1，1

    • Unscrew and replace joystick caps for a more comfortable grip.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与5其他贡献者

HUY NGUYEN

于04/10/17注册

376 声望

创作了3篇指南

徽章: 6

+ 3更多徽章

团队

UW Tacoma, Team S3-G5, Liner Spring 2017 UW Tacoma, Team S3-G5, Liner Spring 2017 的会员

UWT-LINER-S17S3G5

5 名成员

创作了3篇指南

2条评论

Do you know where I can find replacement joystick caps like the one shown in Step 4, please?

cbeilstein - 回复

Same question as above regarding joystick caps please

Alex - 回复

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 1

总计 685