跳转到主内容

简介

The propellers are one of the most important elements of the drone when it comes to flight. Without proper placement, the drone will not be able to fly properly. This guide will teach you how and where to place the propellers.

  1. Using the propeller removal tool (included with the Parrot Bebop Drone), line up the holes with the protruding screws. Using the propeller removal tool (included with the Parrot Bebop Drone), line up the holes with the protruding screws. Using the propeller removal tool (included with the Parrot Bebop Drone), line up the holes with the protruding screws.
    • Using the propeller removal tool (included with the Parrot Bebop Drone), line up the holes with the protruding screws.

  2. While holding the propeller in place, rotate the tool counterclockwise until the screws are aligned with the holes on the propeller. While holding the propeller in place, rotate the tool counterclockwise until the screws are aligned with the holes on the propeller.
    • While holding the propeller in place, rotate the tool counterclockwise until the screws are aligned with the holes on the propeller.

  3. While gently pushing down on the arm of which the propeller is attached, pull the propeller up off the motor.
    • While gently pushing down on the arm of which the propeller is attached, pull the propeller up off the motor.

  4. When putting the propellers back on, the red propellers go up front and the black ones go on the back. The motors with the protruding axles (front right and rear left) have the propeller with the hole in the middle while the motors without the protruding axles (front left and rear right) have the propellers without the hole in the middle. The motors with the protruding axles (front right and rear left) have the propeller with the hole in the middle while the motors without the protruding axles (front left and rear right) have the propellers without the hole in the middle.
    • When putting the propellers back on, the red propellers go up front and the black ones go on the back.

    • The motors with the protruding axles (front right and rear left) have the propeller with the hole in the middle while the motors without the protruding axles (front left and rear right) have the propellers without the hole in the middle.

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

Nazar Savchuk

于2017年01月25日注册

303 信誉积分

创作了2篇指南

团队

UW Tacoma, Team 1-3, Rose Winter 2017 UW Tacoma, Team 1-3, Rose Winter 2017 的会员

UWT-ROSE-W17S1G3

4 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 10

总计 1,648