修复你的物品 社区 商店

Parrot AR.Drone 2.0 Central Cross Replacement

简介

This video shows how to replace a damaged central cross. Music is the only audio. The tools are not specified.

AR.Drone 2.0 spare parts and mounting tools are available from several Parrot retailers.

你所需要的

视频概述

  1. Parrot AR.Drone 2.0 Central Cross Replacement, Mainboard and Navigation Board: 步骤 1 中的图像 1，1

    • Remove the foam body.

    翻译

  2. Parrot AR.Drone 2.0 Central Cross Replacement: 步骤 2 中的图像 1，2 Parrot AR.Drone 2.0 Central Cross Replacement: 步骤 2 中的图像 2，2

    • Disconnect the battery by pulling the two red wires apart.

    • Remove the battery by releasing the battery retaining straps.

    翻译

  3. Parrot AR.Drone 2.0 Central Cross Replacement: 步骤 3 中的图像 1，2 Parrot AR.Drone 2.0 Central Cross Replacement: 步骤 3 中的图像 2，2

    • Turn the drone upside down.

    • The cover is held on by plastic tape. Peel off the tape and use a spudger to remove the back cover.

    翻译

  4. Parrot AR.Drone 2.0 Central Cross Replacement: 步骤 4 中的图像 1，3 Parrot AR.Drone 2.0 Central Cross Replacement: 步骤 4 中的图像 2，3 Parrot AR.Drone 2.0 Central Cross Replacement: 步骤 4 中的图像 3，3

    • Using a spudger, separate the connector for the downward camera.

    • Remove the camera from the body by pulling it off the foam body.

    翻译

  5. Parrot AR.Drone 2.0 Central Cross Replacement: 步骤 5 中的图像 1，2 Parrot AR.Drone 2.0 Central Cross Replacement: 步骤 5 中的图像 2，2
    在这个步骤中使用的工具：
    Tweezers
    $4.99
    购买

    • Use a spudger to release the black retaining clip. Then disconnect the connector to the sensors.

    • Use tweezers to carefully remove the ribbon from the connector.

    翻译

  6. Parrot AR.Drone 2.0 Central Cross Replacement: 步骤 6 中的图像 1，1

    • Remove the four 8mm torx screws with a T6 bit.

    • Remove the four 8mm philips head screws with a PH00 bit.

    翻译

  8. Parrot AR.Drone 2.0 Central Cross Replacement: 步骤 7 中的图像 1，2 Parrot AR.Drone 2.0 Central Cross Replacement: 步骤 7 中的图像 2，2

    • Carefully pull the secondary board from the mainboard.

    翻译

  9. Parrot AR.Drone 2.0 Central Cross Replacement: 步骤 8 中的图像 1，3 Parrot AR.Drone 2.0 Central Cross Replacement: 步骤 8 中的图像 2，3 Parrot AR.Drone 2.0 Central Cross Replacement: 步骤 8 中的图像 3，3

    • Turn the drone right side up

    • Remove the USB connector from the battery retaining straps.

    翻译

  10. Parrot AR.Drone 2.0 Central Cross Replacement: 步骤 9 中的图像 1，1

    • Release the rubber clip holding the USB and battery power cable to the body.

    翻译

  11. Parrot AR.Drone 2.0 Central Cross Replacement: 步骤 10 中的图像 1，2 Parrot AR.Drone 2.0 Central Cross Replacement: 步骤 10 中的图像 2，2

    • Avoid using sharp tools near the battery.

    • Push the USB and power cable through the battery panel.

    翻译

  12. Parrot AR.Drone 2.0 Central Cross Replacement: 步骤 11 中的图像 1，2 Parrot AR.Drone 2.0 Central Cross Replacement: 步骤 11 中的图像 2，2

    • Turn the drone upside down again.

    • Use a spudger to release the connector and carefully remove the ribbon.

    翻译

  13. Parrot AR.Drone 2.0 Central Cross Replacement: 步骤 12 中的图像 1，2 Parrot AR.Drone 2.0 Central Cross Replacement: 步骤 12 中的图像 2，2

    • Lift the mainboard up so that you can access the back.

    • Disconnect the first connector with the white wires using a nylon spudger.

    • Disconnect the second connector with the red and black wires using a spudger.

    翻译

  14. Parrot AR.Drone 2.0 Central Cross Replacement: 步骤 13 中的图像 1，1

    • The mainboard is now fully detached and can be removed.

    翻译

  15. Parrot AR.Drone 2.0 Central Cross Replacement, Central Cross: 步骤 14 中的图像 1，1

    • Using a nylon spudger, peel off the four pieces of plastic securing the frame to the body.

    翻译

  16. Parrot AR.Drone 2.0 Central Cross Replacement: 步骤 15 中的图像 1，1

    • Carefully maneuver the four arms of the drone’s central cross until it detaches from the body by pulling apart the foam surrounding the arms.

    翻译

  17. Parrot AR.Drone 2.0 Central Cross Replacement: 步骤 16 中的图像 1，1

    • The central cross can now be removed and replaced.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

作者

与9其他贡献者

David Hoyt

于04/09/10注册

4,053 声望

创作了41篇指南

徽章: 28

+ 25更多徽章

团队

Cal Poly, Team 25-89, Amido Spring 2010 Cal Poly, Team 25-89, Amido Spring 2010 的会员

CPSU-AMIDO-S10S25G89

4 名成员

创作了61篇指南

2指南评论

If the crossbones are off just a bit would that effect the flight?

John Wurst - 回复

So once I have removed the central cross, how do I put it all back together again?? I feel as though this is letting your guide down!!!!

Jacob Kenworthy - 回复

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 2

过去 30 天： 8

总计 6,249