跳转到主内容

你所需要的

  1. Panasonic Toughbook CF-29 Heat Sink Replacement, Battery: 步骤 1 中的图像 1,1
    • Locate the bay door for the battery on the left side of the laptop.

  2. Panasonic Toughbook CF-29 Heat Sink Replacement: 步骤 2 中的图像 1,2 Panasonic Toughbook CF-29 Heat Sink Replacement: 步骤 2 中的图像 2,2
    • Slide the latch to the right and then down to unlock it.

    • Pull out the battery.

  3. Panasonic Toughbook CF-29 Heat Sink Replacement, Back Cover: 步骤 3 中的图像 1,1
    • Begin by turning the laptop upside down with the handle towards you.

    • Use a Phillips size 0 screwdriver to remove the 4 screws holding down the ram cover.

  4. Panasonic Toughbook CF-29 Heat Sink Replacement: 步骤 4 中的图像 1,1
    • Remove the panel and set it aside.

    • Use a Phillips size 0 screwdriver to remove these 8 small screws.

  5. Panasonic Toughbook CF-29 Heat Sink Replacement: 步骤 5 中的图像 1,1
    • Use a Phillips size 1 screwdriver to remove the remaining 8 screws.

  6. Panasonic Toughbook CF-29 Heat Sink Replacement: 步骤 6 中的图像 1,2 Panasonic Toughbook CF-29 Heat Sink Replacement: 步骤 6 中的图像 2,2
    • Use a plastic opening tool to release, but NOT remove, the back cover because it is sealed with adhesive.

  7. Panasonic Toughbook CF-29 Heat Sink Replacement: 步骤 7 中的图像 1,1
    • Be careful when lifting the cover as you may damage some connections.

    • Slowly lift the cover so that you can disconnect the red and white wires connecting the speaker to the sound card.

  8. Panasonic Toughbook CF-29 Heat Sink Replacement: 步骤 8 中的图像 1,1
    • Now the back cover should be off and you can access the inside of the casing.

  9. Panasonic Toughbook CF-29 Heat Sink Replacement, Heat Sink: 步骤 9 中的图像 1,1
    • Locate the heat sink on the underside of the back cover.

    • It is the U shaped metallic piece.

  10. Panasonic Toughbook CF-29 Heat Sink Replacement: 步骤 10 中的图像 1,1
    • Remove the four screws with a Phillips size 1 screwdriver.

    • One on each of the ends

    • Two on the base of the U shape

  11. Panasonic Toughbook CF-29 Heat Sink Replacement: 步骤 11 中的图像 1,1
    • Being careful not to lose the brackets at the ends of the heat sink, lift it up and out.

结论

To reassemble your device, follow these instructions in reverse order.

Clint Kirsop

于2010年04月13日注册

88 声望

创作了4篇指南

团队

Cal Poly, Team 27-93, Amido Spring 2010 Cal Poly, Team 27-93, Amido Spring 2010 的会员

CPSU-AMIDO-S10S27G93

4 名成员

创作了24篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 2

过去 30 天: 10

总计 5,696