修复你的物品 社区 商店

Panasonic PV-GS9 LCD panel replacement

简介

This guide shows how to remove the side panel containing the LCD viewing screen and speakers to gain access to other parts of the camera.

你所需要的

  1. Panasonic PV-GS9 LCD panel replacement, Microphone Replacement: 步骤 1 中的图像 1，3 Panasonic PV-GS9 LCD panel replacement, Microphone Replacement: 步骤 1 中的图像 2，3 Panasonic PV-GS9 LCD panel replacement, Microphone Replacement: 步骤 1 中的图像 3，3

    • Locate the blue plastic tool opener, then remove both the round record/playback and record/power control knobs by prying it open from the camcorder.

    翻译

  2. Panasonic PV-GS9 LCD panel replacement: 步骤 2 中的图像 1，2 Panasonic PV-GS9 LCD panel replacement: 步骤 2 中的图像 2，2

    • Open the tape compartment.

    • Flip over the camcorder and find the two 4.5mm screws, which are approximately 2 inches apart.

    • Using a #00 Phillips screwdriver, remove the screws

    翻译

  3. Panasonic PV-GS9 LCD panel replacement: 步骤 3 中的图像 1，3 Panasonic PV-GS9 LCD panel replacement: 步骤 3 中的图像 2，3 Panasonic PV-GS9 LCD panel replacement: 步骤 3 中的图像 3，3

    • Use a plastic prying tool, remove the gray trim piece by opening and gently prying it off from top of the camcorder.

    • Be gentle when removing the trim piece. The plastic parts are fragile and can break easily.

    翻译

  4. Panasonic PV-GS9 LCD panel replacement: 步骤 4 中的图像 1，1

    • Rotate the camcorder so that the camera lens is facing you.

    • Remove the four black 4.5mm screws, sitting behind the battery.

    • Remove the 5th screw to the right of the battery dock.

    • Remove the battery by gently pulling away from the camcorder.

    • Organize the screws in a sorting compartment to avoid losing them.

    翻译

  6. Panasonic PV-GS9 LCD panel replacement: 步骤 5 中的图像 1，2 Panasonic PV-GS9 LCD panel replacement: 步骤 5 中的图像 2，2

    • Rotate the camcorder so that the tape compartment is facing you.

    • Remove the single 4.5mm black screw above the hook for the hand strap.

    • Undoing the strap on one end may help.

    • Rotate the camcorder so that the lens is facing you.

    • Remove the single 4.5mm black screw from the front panel.

    翻译

  7. Panasonic PV-GS9 LCD panel replacement: 步骤 6 中的图像 1，2 Panasonic PV-GS9 LCD panel replacement: 步骤 6 中的图像 2，2

    • Rotate the camcorder so that the bottom is facing towards you.

    • Remove the single remaining 4.5mm black screw from the bottom.

    • Remove the four silver 4.5mm screws from the body.

    翻译

  8. Panasonic PV-GS9 LCD panel replacement: 步骤 7 中的图像 1，1

    • Open the LCD screen on the side of the camcorder.

    • Using a #00 screwdriver, remove the two 4.5mm silver screws located on either side of the hinge of the LCD screen.

    翻译

  9. Panasonic PV-GS9 LCD panel replacement: 步骤 8 中的图像 1，2 Panasonic PV-GS9 LCD panel replacement: 步骤 8 中的图像 2，2

    • Carefully detatch the front cover from the body of the camcorder.

    • This should come apart with relative ease; however, a plastic pryer tool may help remove the panel if it is struggling to come apart.

    • Be careful as there is a ribbon cable attached to the front panel and the camcorder body, DO NOT tug at it when you remove this panel.

    翻译

  10. Panasonic PV-GS9 LCD panel replacement: 步骤 9 中的图像 1，2 Panasonic PV-GS9 LCD panel replacement: 步骤 9 中的图像 2，2

    • Using your fingers, carefully pull the ribbon cable away from the logic board to disconnect it.

    翻译

  11. Panasonic PV-GS9 LCD panel replacement, LCD Panel Removal: 步骤 10 中的图像 1，2 Panasonic PV-GS9 LCD panel replacement, LCD Panel Removal: 步骤 10 中的图像 2，2

    • Remove the indicated 4.5mm screws from the LCD side of the camera.

    翻译

  12. Panasonic PV-GS9 LCD panel replacement: 步骤 11 中的图像 1，3 Panasonic PV-GS9 LCD panel replacement: 步骤 11 中的图像 2，3 Panasonic PV-GS9 LCD panel replacement: 步骤 11 中的图像 3，3

    • Place a plastic opening tool under the bottom of the blue panel beneath the camcorder.

    • Move the plastic opening tool up the side of the camcorder as shown. Carefully separate the LCD panel from the rest of the camcorder.

    • Remove the panel from the camcorder.

    • Using two tools can help for stability.

    翻译

  13. Panasonic PV-GS9 LCD panel replacement: 步骤 12 中的图像 1，3 Panasonic PV-GS9 LCD panel replacement: 步骤 12 中的图像 2，3 Panasonic PV-GS9 LCD panel replacement: 步骤 12 中的图像 3，3

    • Before removing the LCD panel from the camcorder, disconnect all the ribbon cables joining the LCD panel to the logic board.

    • There may be multiple ribbon cables attached to the same point on the logic board.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与11其他贡献者

Nate Chamness

于04/15/10注册

24 声望

创作了2篇指南

徽章: 6

+ 3更多徽章

团队

Cal Poly, Team 7-9, Maness Spring 2010 Cal Poly, Team 7-9, Maness Spring 2010 的会员

CPSU-MANESS-S10S7G9

4 名成员

创作了15篇指南

0指南评论

添加评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 5

过去 30 天： 35

总计 4,018