跳转到主内容

简介

This guide will show you how to remove all of the exterior panels of the camera in order to remove and replace the LCD screen panel.

配件

没有特定配件。

  1. Remove all four screws from the side panels. Remove all four screws from the side panels. Remove all four screws from the side panels.
    • Remove all four screws from the side panels.

  2. Remove the two screws from the bottom of the back panel. Remove the back panel as shown in the second and third pictures. Remove the back panel as shown in the second and third pictures.
    • Remove the two screws from the bottom of the back panel.

    • Remove the back panel as shown in the second and third pictures.

  3. Remove the screen from the mounting bracket. Slide the wiring from the board connection. Slide the wiring from the board connection.
    • Remove the screen from the mounting bracket.

    • Slide the wiring from the board connection.

  4. Reconnect the new screen wiring into the motherboard as shown in the picture. Replace the new screen into the mounting bracket. Reconnect the new screen wiring into the motherboard as shown in the picture. Replace the new screen into the mounting bracket. Reconnect the new screen wiring into the motherboard as shown in the picture. Replace the new screen into the mounting bracket.
    • Reconnect the new screen wiring into the motherboard as shown in the picture. Replace the new screen into the mounting bracket.

  5. Replace the front panel and install the screws on the bottom side of the camera. Replace the front panel and install the screws on the bottom side of the camera. Replace the front panel and install the screws on the bottom side of the camera.
    • Replace the front panel and install the screws on the bottom side of the camera.

  6. Replace the side panels and replace the four screws to secure the side panels. Replace the side panels and replace the four screws to secure the side panels. Replace the side panels and replace the four screws to secure the side panels.
    • Replace the side panels and replace the four screws to secure the side panels.

  7. This is what your newly replaced screen should look like.
    • This is what your newly replaced screen should look like.

结论

Now you have a new screen for your Panasonic DMC-ZS8.

6等其他人完成本指南。

Trevor Meyers

于2015年03月03日注册

356 信誉积分

创作了2篇指南

团队

Where do I buy the new screen in the UK? I have been searching online, but not found one for my DMC-TZ70

Bernard Spence - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 3

总计 1,842