跳转到主内容

简介

The lens in the Panasonic Lumix DMC-ZS6 camera may need to be replaced if it is damaged or does not function properly. This guide will show you how to remove the lens from the camera so that it can be replaced with a new one.

Make sure the device is turned off before you begin.

  1. Panasonic Lumix DMC-ZS6 Lens Assembly Replacement, Lens Assembly: 步骤 1 中的图像 1,1
    • Remove the battery and the SD Card.

  2. Panasonic Lumix DMC-ZS6 Lens Assembly Replacement: 步骤 2 中的图像 1,3 Panasonic Lumix DMC-ZS6 Lens Assembly Replacement: 步骤 2 中的图像 2,3 Panasonic Lumix DMC-ZS6 Lens Assembly Replacement: 步骤 2 中的图像 3,3
    • Unscrew the two bottom 1.0 mm screws with a Phillips #000 screwdriver.

    • Unscrew the two 1.0 mm screws to the left with a Phillips #000 screwdriver.

    • Unscrew the two 1.0 mm screws to the right with a Phillips #000 screwdriver.

  3. Panasonic Lumix DMC-ZS6 Lens Assembly Replacement: 步骤 3 中的图像 1,1
    • Carefully separate the back of the camera from the main body.

    • Do not apply excessive force. The LCD is connected by ribbon cables that can be easily damaged.

  4. Panasonic Lumix DMC-ZS6 Lens Assembly Replacement: 步骤 4 中的图像 1,2 Panasonic Lumix DMC-ZS6 Lens Assembly Replacement: 步骤 4 中的图像 2,2
    • Use the tip of the 2.0 mm flathead screwdriver to flip up the black tabs on the ribbon cables.

    • Pull gently on the ribbon cables to unseat them.

  5. Panasonic Lumix DMC-ZS6 Lens Assembly Replacement: 步骤 5 中的图像 1,3 Panasonic Lumix DMC-ZS6 Lens Assembly Replacement: 步骤 5 中的图像 2,3 Panasonic Lumix DMC-ZS6 Lens Assembly Replacement: 步骤 5 中的图像 3,3
    • Unscrew the two 1.0 mm screws to the left with a Phillips #000 screwdriver.

    • Unscrew the two 1.0 mm screws to the right with a Phillips #000 screwdriver.

    • Unscrew the two bottom 1.0 mm screws with a Phillips #000 screwdriver.

  6. Panasonic Lumix DMC-ZS6 Lens Assembly Replacement: 步骤 6 中的图像 1,1
    • Carefully separate the front of the camera from the main body.

  7. Panasonic Lumix DMC-ZS6 Lens Assembly Replacement: 步骤 7 中的图像 1,2 Panasonic Lumix DMC-ZS6 Lens Assembly Replacement: 步骤 7 中的图像 2,2
    • Use the tip of the 1.5 mm flathead screwdriver to disengage the plastic tab.

    • Carefully lift the selector switch away from the motherboard.

  8. Panasonic Lumix DMC-ZS6 Lens Assembly Replacement: 步骤 8 中的图像 1,2 Panasonic Lumix DMC-ZS6 Lens Assembly Replacement: 步骤 8 中的图像 2,2
    • Unscrew the three silver 1.0 mm screws with a Phillips #000 screwdriver.

    • Use the tip of the 2.0 mm flathead to disengage the metal tab, then carefully lift the shield away from the motherboard.

  9. Panasonic Lumix DMC-ZS6 Lens Assembly Replacement: 步骤 9 中的图像 1,1
    • Insert the tip of the 2.0 mm flathead into the center hole of the tripod mount, and apply force in the direction facing away from the button.

    • Carefully lift the tripod mount out of the camera body.

  10. Panasonic Lumix DMC-ZS6 Lens Assembly Replacement: 步骤 10 中的图像 1,2 Panasonic Lumix DMC-ZS6 Lens Assembly Replacement: 步骤 10 中的图像 2,2
    • Use the 2.0 mm flathead to flip up the brown tab on the motherboard and carefully unseat the ribbon cable.

    • Insert the tip of the 2.0 mm flathead screwdriver into the hole on the daughterboard, then apply upward force to remove the daughterboard from the main case.

  11. Panasonic Lumix DMC-ZS6 Lens Assembly Replacement: 步骤 11 中的图像 1,3 Panasonic Lumix DMC-ZS6 Lens Assembly Replacement: 步骤 11 中的图像 2,3 Panasonic Lumix DMC-ZS6 Lens Assembly Replacement: 步骤 11 中的图像 3,3
    • Use the 2.0 mm flathead to flip up the two tabs on the motherboard and carefully unseat the ribbon cables.

    • Unscrew the three silver 1.0 mm screws with a Phillips #000 screwdriver.

    • Carefully lift the lens assembly out of the camera.

结论

To reassemble your device, follow these instructions in reverse order.

Derrick Thompson

于2018年01月30日注册

1,035 声望分

创作了5篇指南

团队

Baylor, Team S2-G5, Johnson Spring 2018 Baylor, Team S2-G5, Johnson Spring 2018 的会员

BU-JOHNSON-S18S2G5

3 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 8

总计 342