简介

Use this guide to replace the camera's battery.

配件

无需配件。

  1. Locate the small, hinged door on the bottom of the camera.
    • Locate the small, hinged door on the bottom of the camera.

    添加评论

  2. Using your fingernail or a spudger, push the small, grey switch on the hinged door from the left (locked) to the right (unlocked).
    • Using your fingernail or a spudger, push the small, grey switch on the hinged door from the left (locked) to the right (unlocked).

    • The hinged door should swing open after unlocking.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Using your fingernail or a spudger, push down on the small, grey tab holding the battery in place.

    • This should release the battery.

    添加评论

    • Pull the battery out of the camera.

    • The battery should slide out easily.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Juan Pablo Quinonez Weston

于2013年04月16日注册

4 信誉积分

创作了4篇指南

团队

Cal Poly, Team 13-60, Johann Spring 2013 Cal Poly, Team 13-60, Johann Spring 2013 的会员

CPSU-JOHANN-S13S13G60

3 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 2

总计 858