跳转到主内容

本指南有最近更改,您可查看未经巡查的最新版本

Panasonic Lumix DMC-TZ5 button board Replacement

你所需要的

  1. Panasonic Lumix DMC-TZ5 button board Replacement, Back Cover: 步骤 1 中的图像 1,1
    • Remove the battery and memory card from the device.

  2. Panasonic Lumix DMC-TZ5 button board Replacement: 步骤 2 中的图像 1,1
    • Remove 4 screws from the right side of the camera.

    • There are two 3.4mm screws at the top.

    • There are two 2.2mm screws at the bottom.

  3. Panasonic Lumix DMC-TZ5 button board Replacement: 步骤 3 中的图像 1,1
    • Remove the single 3.4mm screw on the left side of the camera.

  4. Panasonic Lumix DMC-TZ5 button board Replacement: 步骤 4 中的图像 1,1
    • Remove 5 screws from the base of the camera.

    • There are two 2.2mm screws next to the battery compartment.

    • There are three 4mm screws around the tripod mount.

  5. Panasonic Lumix DMC-TZ5 button board Replacement: 步骤 5 中的图像 1,1
    • Slowly slide the back cover away from the device

    • The back casing is held in place by two ribbon cables. Do not pull the back cover too far from the camera.

  6. Panasonic Lumix DMC-TZ5 button board Replacement: 步骤 6 中的图像 1,2 Panasonic Lumix DMC-TZ5 button board Replacement: 步骤 6 中的图像 2,2
    • Detach both ribbon cables using a spudger.

    • Use the tip of the spudger to lift the black clip upward, unlocking the ribbon cable.

  7. Panasonic Lumix DMC-TZ5 button board Replacement: 步骤 7 中的图像 1,1
    • Remove the back casing from the camera.

  8. Panasonic Lumix DMC-TZ5 button board Replacement, button board: 步骤 8 中的图像 1,2 Panasonic Lumix DMC-TZ5 button board Replacement, button board: 步骤 8 中的图像 2,2
    • Use the spudger to remove the ribbon cable connecting the lens casing to the circuit board by lifting up the black clip.

    • Carefully remove the function switch cover. This unit snaps on and off.

  9. Panasonic Lumix DMC-TZ5 button board Replacement: 步骤 9 中的图像 1,1
    • Carefully unsnap the front logic board from the rear logic board using a spudger.

  10. Panasonic Lumix DMC-TZ5 button board Replacement: 步骤 10 中的图像 1,2 Panasonic Lumix DMC-TZ5 button board Replacement: 步骤 10 中的图像 2,2
    • Slide the entire top part of the camera that is attached to the logic board, horizontally away from the camera.

  11. Panasonic Lumix DMC-TZ5 button board Replacement: 步骤 11 中的图像 1,3 Panasonic Lumix DMC-TZ5 button board Replacement: 步骤 11 中的图像 2,3 Panasonic Lumix DMC-TZ5 button board Replacement: 步骤 11 中的图像 3,3
    • Remove the ribbon cable from the top connection panel by unlocking the black clip with a spudger.

    • This leaves you with the logic board and the top connection panel separate and free from the camera

结论

To reassemble your device, follow these instructions in reverse order.

Ben Canfield

于10/10/10注册

409 声望

创作了3篇指南

团队

Cal Poly, Team 9-21, Regan Fall 2010 Cal Poly, Team 9-21, Regan Fall 2010 的会员

CPSU-REGAN-F10S9G21

4 名成员

创作了14篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 1

过去 30 天: 4

总计 5,592