跳转到主内容

简介

This guide requires the use of a screw driver and close attention to which screws need to be removed.

配件

没有特定配件。

  1. Panasonic Lumix DMC-GF2 Front Cover Replacement, Battery: 步骤 1 中的图像 1,1
    • On the bottom of the camera, use your finger to push the lock button to the open position which will cause the hinged door to swing open.

  2. Panasonic Lumix DMC-GF2 Front Cover Replacement: 步骤 2 中的图像 1,2 Panasonic Lumix DMC-GF2 Front Cover Replacement: 步骤 2 中的图像 2,2
    • Push the small black tab that holds the battery with your finger to release the battery.

    • Use your fingers to pull the battery out of the camera.

  3. Panasonic Lumix DMC-GF2 Front Cover Replacement, Front Cover: 步骤 3 中的图像 1,3 Panasonic Lumix DMC-GF2 Front Cover Replacement, Front Cover: 步骤 3 中的图像 2,3 Panasonic Lumix DMC-GF2 Front Cover Replacement, Front Cover: 步骤 3 中的图像 3,3
    • Using a Philips #00 screwdriver, remove six 2.69 mm screws located on the two short sides and on the bottom of the camera.

    • To loosen a screw, turn the screwdriver to the left. To tighten a screw, turn the screwdriver to the right.

  4. Panasonic Lumix DMC-GF2 Front Cover Replacement: 步骤 4 中的图像 1,1
    • Using a Phillips #00 screwdriver, remove four black 2.69 mm screws from the front of the camera.

  5. Panasonic Lumix DMC-GF2 Front Cover Replacement: 步骤 5 中的图像 1,1
    • Using your hand, gently lift up the front cover and separate it from the camera.

结论

To reassemble your device, follow these instructions in reverse order.

Nicole Gerlach

于2016年10月30日注册

182 声望

撰写一个指南

团队

Baylor, Team 5-9, Williams Fall 2016 Baylor, Team 5-9, Williams Fall 2016 的会员

BU-WILLIAMS-F16S5G9

3 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 1

过去 30 天: 9

总计 793