本指南有最近更改,您可查看未经巡查的最新版本。
简介
Directions are given as if you were holding the camera to take a picture.
你所需要的
-
-
Locate the memory card and battery card latch on the bottom of the camera.
-
Slide the latch to the open position.
-
-
-
-
Using a size #00 Phillips screwdriver, remove the three 4.58 mm screws on the bottom of the camera.
-
Use this screwdriver for all screws in the device.
-
即将完成!
To reassemble your device, follow these instructions in reverse order.
结论
To reassemble your device, follow these instructions in reverse order.
另外一个人完成了本指南。