跳转到主内容

简介

If your Panasonic KX-TGA410C handset’s keypad is not working as intended, or worn out and the numbers are no longer visible, use this guide to replace the button pad.

  1. Panasonic KX-TGA410C Keypad Replacement, Keypad: 步骤 1 中的图像 1,3 Panasonic KX-TGA410C Keypad Replacement, Keypad: 步骤 1 中的图像 2,3 Panasonic KX-TGA410C Keypad Replacement, Keypad: 步骤 1 中的图像 3,3
    • Slide the battery cover in a downwards motion to uncover the batteries.

    • Use the indentation on the case.

  2. Panasonic KX-TGA410C Keypad Replacement: 步骤 2 中的图像 1,1
    • Remove the batteries by pulling them forward.

  3. Panasonic KX-TGA410C Keypad Replacement: 步骤 3 中的图像 1,3 Panasonic KX-TGA410C Keypad Replacement: 步骤 3 中的图像 2,3 Panasonic KX-TGA410C Keypad Replacement: 步骤 3 中的图像 3,3
    • Use a Phillips #00 screwdriver and remove two 6.4 mm screws.

    • The screws are at the bottom right and left-hand corner.

  4. Panasonic KX-TGA410C Keypad Replacement: 步骤 4 中的图像 1,2 Panasonic KX-TGA410C Keypad Replacement: 步骤 4 中的图像 2,2
    • Take an opening tool or pick and slide it in between the back and front cover all the way around the phone, then pull the back case off.

  5. Panasonic KX-TGA410C Keypad Replacement: 步骤 5 中的图像 1,1
    • Use a Phillips #00 screwdriver to remove one 6.4 mm screw from the top left corner of the phone.

  6. Panasonic KX-TGA410C Keypad Replacement: 步骤 6 中的图像 1,1
    • Gently pull the circuit board back.

  7. Panasonic KX-TGA410C Keypad Replacement: 步骤 7 中的图像 1,1
    • Pull the button pad out.

结论

To reassemble your device, follow these instructions in reverse order.

Mumtaaz Mohamoud

于2021年09月15日注册

145 声望分

撰写一个指南

团队

York University, Team E-16, Melo-Thaiss Fall 2021 York University, Team E-16, Melo-Thaiss Fall 2021 的会员

YORK-MELO-THAISS-F21SEG16

1 名成员

创作了1篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 2

过去的30天: 18

总计 91