修复你的物品 社区 商店

Panasonic KX-E603 Fuse Replacement

简介

This guide will demonstrate how to replace the fuse on your typewriter, step-by-step.

你所需要的

  1. Panasonic KX-E603 Fuse Replacement, Case: 步骤 1 中的图像 1，2 Panasonic KX-E603 Fuse Replacement, Case: 步骤 1 中的图像 2，2

    • Flip the typewriter to expose the bottom body panel.

    • Be careful to not damage the top surface of the typewriter when you rest it upside-down.

    翻译

  2. Panasonic KX-E603 Fuse Replacement: 步骤 2 中的图像 1，1

    • Remove the three 19 mm screws located in the recessed holes on the edge of the black underside panel using a Phillips #2 screwdriver.

    翻译

  3. Panasonic KX-E603 Fuse Replacement: 步骤 3 中的图像 1，1

    • Flip the typewriter back to its original orientation, then rotate it so that the rear is facing towards you.

    • Remove the three 19 mm screws near the bottom of the tan body panel using a Phillips #2 screwdriver.

    翻译

  4. Panasonic KX-E603 Fuse Replacement: 步骤 4 中的图像 1，2 Panasonic KX-E603 Fuse Replacement: 步骤 4 中的图像 2，2

    • Open the typewriter lid and push the carriage away to expose the two screws holding the case to the chassis.

    • Remove the two 19 mm screws using a Phillips #2 screwdriver.

    翻译

  6. Panasonic KX-E603 Fuse Replacement: 步骤 5 中的图像 1，2 Panasonic KX-E603 Fuse Replacement: 步骤 5 中的图像 2，2

    • Flip the plastic lever on the right side of the roller wheel to disengage the paper lock.

    翻译

  7. Panasonic KX-E603 Fuse Replacement: 步骤 6 中的图像 1，3 Panasonic KX-E603 Fuse Replacement: 步骤 6 中的图像 2，3 Panasonic KX-E603 Fuse Replacement: 步骤 6 中的图像 3，3

    • Remove the roller wheel adjustment knobs by pulling firmly outward.

    • Both black knobs must be removed in this step.

    翻译

  8. Panasonic KX-E603 Fuse Replacement: 步骤 7 中的图像 1，2 Panasonic KX-E603 Fuse Replacement: 步骤 7 中的图像 2，2

    • Unlock the roller wheel by simultaneously pressing down on the two spring levers on the left and right of the roller ends.

    翻译

  9. Panasonic KX-E603 Fuse Replacement: 步骤 8 中的图像 1，2 Panasonic KX-E603 Fuse Replacement: 步骤 8 中的图像 2，2

    • While both spring levers are depressed, lift up with both hands to remove the roller wheel.

    翻译

  10. Panasonic KX-E603 Fuse Replacement: 步骤 9 中的图像 1，3 Panasonic KX-E603 Fuse Replacement: 步骤 9 中的图像 2，3 Panasonic KX-E603 Fuse Replacement: 步骤 9 中的图像 3，3

    • Flip the top down. Then, with both hands, lift straight up on the tan case to remove it from the chassis.

    翻译

  11. Panasonic KX-E603 Fuse Replacement, Fuse: 步骤 10 中的图像 1，1

    • The capacitors can be a shock hazard, avoid touching them.

    • The fuse can be found very close to two large, blue capacitors near the rear of the typewriter.

    翻译

  12. Panasonic KX-E603 Fuse Replacement: 步骤 11 中的图像 1，1

    • The fuse body is made from glass; be careful not to use too much force or it could break.

    • Firmly grasp the fuse between your fingers and pull upwards to remove it from its mount.

    • If the fuse is difficult to grasp with your hands, a spudger may be used instead.

    翻译
结论

To reassemble your device, use the new fuse and follow these instructions in reverse order.

作者

与4其他贡献者

Lindsay Stratis

于04/08/15注册

491 声望

创作了4篇指南

徽章: 10

+ 7更多徽章

团队

Cal Poly, Team 17-1, Forte Spring 2015 Cal Poly, Team 17-1, Forte Spring 2015 的会员

CPSU-FORTE-S15S17G1

4 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 5

过去 30 天： 7

总计 421