简介

Before you begin disassembly, be sure to have the necessary tool. You will need a Torx size T6 screwdriver. You will be removing the stylus in order to take off the back panel.

Remove the stylus from the side of the PDA by sliding it upwards.
  • Remove the stylus from the side of the PDA by sliding it upwards.

添加评论

Remove the 4 screws from the corners of the back panel of the device using a size T6 Torx screwdriver.
  • Remove the 4 screws from the corners of the back panel of the device using a size T6 Torx screwdriver.

  • Place screws in a plastic bag or another safe place.

添加评论

  • Insert the edge of the plastic opening tool between the back panel and the black stylus holder.

  • Carefully and forcefully pry the panels apart.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Alex Haggblade

于2011年01月12日注册

104 信誉积分

撰写一个指南

团队

Cal Poly, Team 14-9, Forte Winter 2011 Cal Poly, Team 14-9, Forte Winter 2011 的会员

CPSU-FORTE-W11S14G9

6 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 2

总计 964