简介

Replacement parts can be hard to find. The case on the m105 can be easily removed, and a replacement shell casing can be used to replace your damaged one. Check out this site here to buy a replacement.

配件

无需配件。

  1. Remove the protective flip lid of the device. Open lid and pull. There are two clips that will pop out.
    • Remove the protective flip lid of the device. Open lid and pull. There are two clips that will pop out.

    添加评论

  2. Next, remove the plate on the top of the device. There is a tab at the top that un- clips and allows you to remove the face plate.
    • Next, remove the plate on the top of the device. There is a tab at the top that un- clips and allows you to remove the face plate.

    添加评论

    • Remove the batteries by opening the battery compartment on the back of the device. Remove one battery at a time.

    添加评论

    • Using a T-5 Torx screwdriver, remove all four screws at the back of device by turning counterclockwise. Screwdriver located here.

    添加评论

    • Once the four screws are removed, you are able to remove the back and front cover from the interior parts of the device.

    添加评论

  3. 添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Travis

于2011年10月04日注册

4 信誉积分

撰写一个指南

团队

UW Stout, Team 1-3, Zhou Fall 2011 UW Stout, Team 1-3, Zhou Fall 2011 的会员

UWSTOUT-ZHOU-F11S1G3

4 名成员

创作了7篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 7

过去的30天: 14

总计 578