跳转到主内容

Palm m105 Motherboard Replacement

你所需要的

  1. Palm m105 Motherboard Replacement, Motherboard: 步骤 1 中的图像 1,1
    • Start with your intact Palm m105.

  2. Palm m105 Motherboard Replacement: 步骤 2 中的图像 1,1
    • Remove protective flap by pulling directly out from the top.

    • The two clips will pop out

  3. Palm m105 Motherboard Replacement: 步骤 3 中的图像 1,1
    • Remove Faceplate. There is a tab where the finger is located in the picture that needs to be pulled up.

    • The Faceplate will then easily lift off

  4. Palm m105 Motherboard Replacement: 步骤 4 中的图像 1,2 Palm m105 Motherboard Replacement: 步骤 4 中的图像 2,2
    • Using a T5 Torx bit screwdriver, remove the four screws located on the back of the device turning counter clockwise.

    • The link to purchase this screwdriver is Located here.

  5. Palm m105 Motherboard Replacement: 步骤 5 中的图像 1,1
    • This is what the device looks like once you have taken the screws out and opened the device.

  6. Palm m105 Motherboard Replacement: 步骤 6 中的图像 1,1
    • The Motherboard and screen will pop out of the back case easily.

    • Be careful when doing this step, the components are fragile.

  7. Palm m105 Motherboard Replacement: 步骤 7 中的图像 1,1
    • To remove the screen from the motherboard there are going to be three tabs that need to pulled up.

    • ** This step needs to be done with special care because it is very fragile.**

    • Once they are all three popped up the motherboard and screen will separate easily.

  8. Palm m105 Motherboard Replacement: 步骤 8 中的图像 1,1
结论

To reassemble your device, follow these instructions in reverse order.

Aaron

于10/04/11注册

7 声望

撰写一个指南

团队

UW Stout, Team 1-3, Zhou Fall 2011 UW Stout, Team 1-3, Zhou Fall 2011 的会员

UWSTOUT-ZHOU-F11S1G3

4 名成员

创作了7篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 1

过去 30 天: 9

总计 1,057