简介

Use this guide to replace a screen that is cracked or otherwise broken. Ensure that the problem can't be eliminated any other way, such as with a reset. See the Zire72v1 Troubleshooting page for other techniques to use on a faulty device.

  1. Power off your Zire 72 and turn the unit over.
    • Power off your Zire 72 and turn the unit over.

    添加评论

    • Remove the two screws on the bottom of the rear of the unit.

    添加评论

    • Peel back the information sticker.

    • Remove the one screw that connects the metal panel to the body of the Zire72.

    添加评论

    • Use the tip of your screwdriver to pop the metal panel off the top of the rear of the unit to expose two more screws on the top corners.

    添加评论

    • Remove the two top screws.

    添加评论

  2. GIVE TOOLS. FIX FOREVER.

    GIVE TOOLS.

    FIX FOREVER.

    Spread the Fixmas cheer.

    GIVE TOOLS. FIX FOREVER.

    Spread the Fixmas cheer.

    • Insert the tip of your screwdriver in the seam where the front frame meets the body of the unit and pry the frame up to pop it off. Remove it.

    添加评论

    • Pull the back panel off the body of the unit to expose the motherboard in the body.

    添加评论

    • Unplug the two orange ribbon cables at the top of the motherboard and remove the motherboard from the body. All that is left is the LCD screen in the front housing of the unit.

    添加评论

    • Remove the screen from the front housing and set it aside.

    添加评论

    • Now that you have your Zire open, you can remove and replace the defective part.

    添加评论

    • Having successfully completed the Palm Zire72v1 Teardown, your device should now closely resemble this picture.

    • The front and back panels should be separated and laid side-by-side.

      • The front panel is on the left and contains the screen and navigation buttons.

      • The back panel is on the right and contains the circuit board and battery.

    添加评论

    • To replace the screen, you will be working exclusively with the front (left) panel.

    添加评论

    • Remove the old screen.

      • Slide the screen upward and out of the plastic shell.

    • The navigation panel may be removed if it interferes with screen replacement.

    添加评论

    • Once the old screen is completely, you be left with the plastic shell.

    • The new screen will be inserted into this case.

    添加评论

    • The old screen will be entirely separate from the rest of the device.

      • Dispose of this broken technology responsibly.

    • You are now set to insert the new screen and reassemble the device.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Celeste

于2011年09月08日注册

19 信誉积分

撰写一个指南

团队

A very clear process description, thank you very much.

And the disassembly process described works for battery replacement too.

But where can I find a replacement screen? One that doesn't cost the earth? And where too can I find a battery replacement?

TIA,

JC in Canberra, Australia

jthadcarroll@yahoo.com.au

jthadcarroll - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 1,147