修复你的物品 社区 商店

本指南有最近更改，您可查看未经巡查的最新版本。

Palm Treo 755p Back Cover Replacement

简介

Remove the back cover to reveal internal components, such as the circuit board, keyboard and screen.

你所需要的

  1. Palm Treo 755p Back Cover Replacement, Battery: 步骤 1 中的图像 1，3 Palm Treo 755p Back Cover Replacement, Battery: 步骤 1 中的图像 2，3 Palm Treo 755p Back Cover Replacement, Battery: 步骤 1 中的图像 3，3

    • Press the button on the back cover to release the battery cover.

    • Slide off the battery cover.

    翻译

  2. Palm Treo 755p Back Cover Replacement: 步骤 2 中的图像 1，2 Palm Treo 755p Back Cover Replacement: 步骤 2 中的图像 2，2

    • Remove the battery by lifting up on one side.

    翻译

  3. Palm Treo 755p Back Cover Replacement, Back Cover: 步骤 3 中的图像 1，2 Palm Treo 755p Back Cover Replacement, Back Cover: 步骤 3 中的图像 2，2

    • Remove the stylus by pulling up on the large top to reveal the top left case screw.

    • Pull away the black flap to reveal the top right case screw.

    翻译

  5. Palm Treo 755p Back Cover Replacement: 步骤 4 中的图像 1，1

    • WARNING: The top right red screw marked by the red circle has a warranty seal. Removing this seal will void your warranty.

    • Use the T5 screwdriver attachment to remove the 5 black back case screws marked by the red and yellow circles. These screws are 0.274 inches long.

    • Use the same T5 screwdriver attachment to remove the middle screw marked by the blue circle. It is shorter than the other screws at 0.121 inches in length.

    翻译

  6. Palm Treo 755p Back Cover Replacement: 步骤 5 中的图像 1，2 Palm Treo 755p Back Cover Replacement: 步骤 5 中的图像 2，2

    • Use the plastic opening tool to pry open the device. Start on the volume control side (left side of the screen) and work your way up along the edge and across the top.

    • ATTENTION: Side volume control buttons may fall out after opening the device.

    翻译

  7. Palm Treo 755p Back Cover Replacement: 步骤 6 中的图像 1，2 Palm Treo 755p Back Cover Replacement: 步骤 6 中的图像 2，2

    • Slowly unfold the back casing away from the front casing revealing the red and black wound wire speaker cable, marked by the yellow box.

    • WARNING: Be gentle while separating the halves to prevent breaking the red and black wound wire speaker cable that bridges both halves.

    翻译

  8. Palm Treo 755p Back Cover Replacement: 步骤 7 中的图像 1，3 Palm Treo 755p Back Cover Replacement: 步骤 7 中的图像 2，3 Palm Treo 755p Back Cover Replacement: 步骤 7 中的图像 3，3

    • Using tweezers, squeeze the plastic head of the black and red wound wire cable. This will detach the cable from the circuit board and fully separate the two halves.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与10其他贡献者

Mike Shaw

于01/03/11注册

601 声望

创作了6篇指南

徽章: 8

+ 5更多徽章

团队

Cal Poly, Team 14-6, Forte Winter 2011 Cal Poly, Team 14-6, Forte Winter 2011 的会员

CPSU-FORTE-W11S14G6

6 名成员

创作了12篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 1

总计 1,537