简介

Follow this guide to gain access to your Treo's motherboard.

Press the button located just above the Sprint™ logo then slide the cover down.
  • Press the button located just above the Sprint™ logo then slide the cover down.

添加评论

Use the small notch on the left hand side of the phone to remove the battery.
  • Use the small notch on the left hand side of the phone to remove the battery.

添加评论

  • Remove the stylus from the phone.

添加评论

  • After removing the battery and stylus, unscrew the 5 Torx screws (using a T-5 Torx screw driver)

添加评论

  • Using the spudger, remove the small rubberized patch under the antenna.

添加评论

  • Unscrew the last two screws using the previous screw driver.

添加评论

  • Using the plastic opening tool, gently separate the back case from the phone body.

添加评论

  • Using a plastic opening tool, gently edge your way between the back and border case (Picture 2) until they are completely separated (Picture 3).

添加评论

  • Remove the antenna chip by unscrewing the two screws with Torx T-5 screwdriver (Picture 1).

  • Once unscrewed, gently detach the antenna chip with your hands (Picture 2).

添加评论

  • Use the plastic opening tool to unlock the tab holding the keyboard connection (Picture 1).

  • Once the keyboard connection is detached, use your hands to gently separate the motherboard from the back panel (Picture 2).

添加评论

  • To completely detach the motherboard from the back panel, use the plastic opening tool to unlock the LCD connection from the motherboard (Picture 2).

  • Once the LCD connection is unlocked, the motherboard should now be completely detached from the back panel, keyboard, and LCD (Picture 3).

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Ivan

于2012年04月29日注册

11 信誉积分

撰写一个指南

团队

Cal Poly, Team 12-37, Regan Spring 2012 Cal Poly, Team 12-37, Regan Spring 2012 的会员

CPSU-REGAN-S12S12G37

4 名成员

创作了14篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 689