配件

无需配件。

  1. Press the button located just above the Sprint™ logo and then slide the cover down.
    • Press the button located just above the Sprint™ logo and then slide the cover down.

    添加评论

  2. Use the small notch on the left hand side of the phone to remove the battery.
    • Use the small notch on the left hand side of the phone to remove the battery.

    添加评论

    • Remove the stylus from the phone.

    添加评论

    • After removing the battery and stylus, unscrew the 5 Torx screws (using a T-5 Torx screw driver)

    添加评论

    • Using the spudger, remove the small rubberized patch under the antenna.

    添加评论

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Unscrew the last two screws using the previous screw driver.

    添加评论

    • Using the plastic opening tool, gently separate the back case from the phone body.

    添加评论

    • Using a plastic opening tool, gently edge your way between the back and border case (Picture 2) until they are completely separated (Picture 3).

    添加评论

    • Remove the antenna chip by unscrewing the two screws with Torx T-5 screwdriver (Picture 1).

    • Once unscrewed, gently detach the antenna chip with your hands (Picture 2).

    添加评论

    • Use the plastic opening tool to unlock the tab holding the keyboard connection (Picture 1).

    • Once the keyboard connection is detached, use your hands to gently separate the motherboard from the back panel (Picture 2).

    添加评论

    • To completely detach the motherboard from the back panel, use the plastic opening tool to unlock the LCD connection from the motherboard (Picture 2).

    • Once the LCD connection is unlocked, the motherboard should now be completely detached from the back panel, keyboard, and LCD (Picture 3).

    添加评论

    • Using the plastic opening tool, loosen the metal camera holder.

    添加评论

    • Once the camera holder is loose, gently detach it from the camera.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

John Rainier Solanzo

于2012年04月17日注册

4 信誉积分

创作了2篇指南

团队

Cal Poly, Team 12-37, Regan Spring 2012 Cal Poly, Team 12-37, Regan Spring 2012 的会员

CPSU-REGAN-S12S12G37

4 名成员

创作了14篇指南

Does anyone know where or how to get a developers guide or geeks guide to tearing this phone down completely? I have a number of these, as well as old Galaxy Note phones, a broken S7 etc. And I would love to have the blueprint to know how to hack a LTE antenae, and S7 camera into my treo palm 700p..Wouldn't that be awesome? I still like it better than the modern smart phone, and just lost use of it when my carrier killed CDMA last week> :-(

peterveri - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 475