简介

Follow this guide to access and remove the antenna of the cell phone.

  1. Press the button located just above the Sprint™ logo and then slide the cover down. Press the button located just above the Sprint™ logo and then slide the cover down. Press the button located just above the Sprint™ logo and then slide the cover down.
    • Press the button located just above the Sprint™ logo and then slide the cover down.

  2. Use the small notch on the left hand side of the phone to remove the battery. Use the small notch on the left hand side of the phone to remove the battery.
    • Use the small notch on the left hand side of the phone to remove the battery.

  3. Remove the stylus from the phone.
    • Remove the stylus from the phone.

  4. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店

    善于维修,即天赋异禀。

    与 #ImAGenius 分享您的维修故事

    我们都是天才

    与 #ImAGenius 分享您的维修故事

  5. After removing the battery and stylus, unscrew the 5 Torx screws using a T-5 Torx screw driver.
    • After removing the battery and stylus, unscrew the 5 Torx screws using a T-5 Torx screw driver.

  6. Using the spudger, remove the small rubberized patch under the antenna.
    • Using the spudger, remove the small rubberized patch under the antenna.

  7. Unscrew the last two screws using the same T-5 Torx screw driver.
    • Unscrew the last two screws using the same T-5 Torx screw driver.

  8. Using the plastic opening tool, carefully pry open the back case to loosen the antenna.
    • Using the plastic opening tool, carefully pry open the back case to loosen the antenna.

  9. The antenna will now be loose, gently pull the antenna out of the phone.
    • The antenna will now be loose, gently pull the antenna out of the phone.

结论

To reassemble your device, follow these instructions in reverse order.

John Rainier Solanzo

于2012年04月17日注册

4 信誉积分

创作了2篇指南

团队

Cal Poly, Team 12-37, Regan Spring 2012 Cal Poly, Team 12-37, Regan Spring 2012 的会员

CPSU-REGAN-S12S12G37

4 名成员

创作了14篇指南

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 693