跳转到主内容

修复你的物品

维修的权力

配件 & 工具

简介

This is a guide that indicates how to replace a faulty microphone for the Palm Treo 680.

  1. Remove the battery cover by pressing on the small rectangular button located on the back of the phone. Remove the battery cover by pressing on the small rectangular button located on the back of the phone.
    • Remove the battery cover by pressing on the small rectangular button located on the back of the phone.

  2. Remove the battery by pulling it out towards you.
    • Remove the battery by pulling it out towards you.

  3. Remove the stylus in order to access the screw. Remove the 27mm top-left screw using a T6 Torx screwdriver.
    • Remove the stylus in order to access the screw.

    • Remove the 27mm top-left screw using a T6 Torx screwdriver.

  4. LCD iPhone 屏幕维修套装

    预算选项,涵盖在我们的终身保修中。

    购买套装

    LCD iPhone 屏幕维修套装

    削减维修成本,而不是质量。

    购买套装
  5. Using the spudger, remove the rubber rectangular cover located in the upper rear, right-hand corner. Remove the 27mm screw using the T6 Torx screwdriver.
    • Using the spudger, remove the rubber rectangular cover located in the upper rear, right-hand corner.

    • Remove the 27mm screw using the T6 Torx screwdriver.

    • If there is a red Palm sticker covering this screw, puncture it to access the screw.

  6. Remove the remaining two 27mm screws from the bottom using the T6 screwdriver.
    • Remove the remaining two 27mm screws from the bottom using the T6 screwdriver.

  7. Turn the phone so the screen is facing the right side. Use a spudger to carefully separate the back panel from the front panel to access components inside the phone. Separate the covers from the left side of the device as indicated in the picture.
    • Turn the phone so the screen is facing the right side.

    • Use a spudger to carefully separate the back panel from the front panel to access components inside the phone.

    • Separate the covers from the left side of the device as indicated in the picture.

    • The right side contains orange ribbons that are easily damaged.

  8. Using a pair of tweezers, grasp the blue rubber microphone. Pull the rubber microphone up and back to remove it.
    • Using a pair of tweezers, grasp the blue rubber microphone.

    • Pull the rubber microphone up and back to remove it.

    • Now you have successfully removed the microphone.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Maiya123

于2009年10月22日注册

51 信誉积分

创作了6篇指南

团队

Cal Poly, Team 6-4, Maness Fall 2009 Cal Poly, Team 6-4, Maness Fall 2009 的会员

CPSU-MANESS-F09S6G4

4 名成员

创作了12篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 4,034