跳转到主内容

本指南有最近更改,您可查看未经巡查的最新版本

Palm Treo 650 Microphone Replacement

你所需要的

  1. Palm Treo 650 Microphone Replacement, Battery and Stylus: 步骤 1 中的图像 1,1
    • Position the phone so the screen faces down.

    • Remove the stylus found on the back of the phone.

  2. Palm Treo 650 Microphone Replacement: 步骤 2 中的图像 1,1
    • Hold the button in the middle of the phone's back to remove the battery cover.

    • Slide the cover down to remove it, and set the cover aside.

  3. Palm Treo 650 Microphone Replacement: 步骤 3 中的图像 1,2 Palm Treo 650 Microphone Replacement: 步骤 3 中的图像 2,2
    • Lift the edge of the battery, separating contact points, and pull out as pictured.

  4. Palm Treo 650 Microphone Replacement, Case: 步骤 4 中的图像 1,1
    • Remove the round, rubber cover to expose a screw that will be removed in the next step.

  5. Palm Treo 650 Microphone Replacement: 步骤 5 中的图像 1,2 Palm Treo 650 Microphone Replacement: 步骤 5 中的图像 2,2
    • Remove the six 6.9 mm screws as pictured with a T5 Torx screwdriver.

    • Remove the single 9.8 mm screw next to the antenna on the back plate, using a Phillips #00 screwdriver.

  6. Palm Treo 650 Microphone Replacement: 步骤 6 中的图像 1,1
    • Pull the antenna outward to remove the antenna from the body of the phone.

  7. Palm Treo 650 Microphone Replacement: 步骤 7 中的图像 1,2 Palm Treo 650 Microphone Replacement: 步骤 7 中的图像 2,2
    • Pry the back cover off using an iFixit opening tool.

    • Several small clips on the inside attach to the back cover.

  8. Palm Treo 650 Microphone Replacement, Motherboard: 步骤 8 中的图像 1,3 Palm Treo 650 Microphone Replacement, Motherboard: 步骤 8 中的图像 2,3 Palm Treo 650 Microphone Replacement, Motherboard: 步骤 8 中的图像 3,3
    • Disconnect the ribbon cable before removing the motherboard.

    • Unclip the gray tab.

    • Pull out the orange ribbon cable.

  9. Palm Treo 650 Microphone Replacement: 步骤 9 中的图像 1,2 Palm Treo 650 Microphone Replacement: 步骤 9 中的图像 2,2
    • Pull off the motherboard.

  10. Palm Treo 650 Microphone Replacement, Keyboard: 步骤 10 中的图像 1,1
    • Unscrew the two 3.2 mm screws with a Phillips #00 screwdriver.

  11. Palm Treo 650 Microphone Replacement: 步骤 11 中的图像 1,1
    • Pull off the circuit board.

  12. Palm Treo 650 Microphone Replacement: 步骤 12 中的图像 1,1
    • Remove the keypad for cleaning or replacing.

  13. Palm Treo 650 Microphone Replacement, Microphone: 步骤 13 中的图像 1,1
    • Place the circuit board with the microphone facing up.

  14. Palm Treo 650 Microphone Replacement: 步骤 14 中的图像 1,2 Palm Treo 650 Microphone Replacement: 步骤 14 中的图像 2,2
    • The microphone should be able to pop off easily using your finger.

结论

To reassemble your device, follow these instructions in reverse order.

cgood

于10/28/09注册

122 声望

创作了7篇指南

团队

Cal Poly, Team 19-3, Maness Fall 2009 Cal Poly, Team 19-3, Maness Fall 2009 的会员

CPSU-MANESS-F09S19G3

4 名成员

创作了18篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 2

总计 4,526