Palm Treo 650 Case Replacement - iFixit 维修指南

本指南有最近更改，您可查看未经巡查的最新版本。

简介

Need to access the interior. Here's how to take off the case to do that.

你所需要的

步骤 1 Battery and Stylus

Palm Treo 650 Case Replacement, Battery and Stylus: 步骤 1 中的图像 1，1

Position the phone so the screen faces down.
Remove the stylus found on the back of the phone.

步骤 2

Palm Treo 650 Case Replacement: 步骤 2 中的图像 1，1

Hold the button in the middle of the phone's back to remove the battery cover.
Slide the cover down to remove it, and set the cover aside.

步骤 3

Palm Treo 650 Case Replacement: 步骤 3 中的图像 1，2

Palm Treo 650 Case Replacement: 步骤 3 中的图像 2，2

Lift the edge of the battery, separating contact points, and pull out as pictured.

步骤 4 Case

Palm Treo 650 Case Replacement, Case: 步骤 4 中的图像 1，1

Remove the small round rubber cover on the back of the phone located immediately below the antenna.
This will uncover a screw that will be removed in the next step.

步骤 5

Palm Treo 650 Case Replacement: 步骤 5 中的图像 1，3

Palm Treo 650 Case Replacement: 步骤 5 中的图像 2，3

Palm Treo 650 Case Replacement: 步骤 5 中的图像 3，3

Unscrew six black 6.9 mm Torx screws with a T5 Torx Screwdriver.
Unscrew one 9.75 mm Phillips antenna screw with a Phillips #00 Screwdriver.
Pull out the antenna.

步骤 6

Palm Treo 650 Case Replacement: 步骤 6 中的图像 1，2

Palm Treo 650 Case Replacement: 步骤 6 中的图像 2，2

Pry the back cover off using a spudger or similar tool.
The back cover is attached by several small clips on the inside.

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

作者

与14其他贡献者

mmedrano

于11/15/09注册

95 声望

创作了2篇指南

+ 6更多徽章

团队

Cal Poly, Team 19-3, Maness Fall 2009 Cal Poly, Team 19-3, Maness Fall 2009 的会员

CPSU-MANESS-F09S19G3

4 名成员

创作了18篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 1

总计 3,072