简介

Replace the speaker

  1. On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.
    • On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.

    添加评论

  2. Use the T6 Torx Screwdriver to remove all 4 screws.
    • Use the T6 Torx Screwdriver to remove all 4 screws.

    • You have to first remove the Stylus to access the 4th screw.

    添加评论

  3. 订单满 $20 免运费
    结账时使用优惠码 BLUEANDBLACK
    订单满 $20 免运费
    使用优惠码 BLUEANDBLACK
    • Using a plastic opening tool, carefully separate the front and back cases.

    • Note: The antenna will detach from the phone.

    添加评论

    • Using the spudger, pull the speaker straight up.

    添加评论

    • Gently pull the rubber coating off of the speaker.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Clement Poisson

于2010年01月26日注册

24 信誉积分

创作了7篇指南

团队

Cal Poly, Team 13-23, Maness Winter 2010 Cal Poly, Team 13-23, Maness Winter 2010 的会员

CPSU-MANESS-W10S13G23

4 名成员

创作了16篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 1

过去的30天: 1

总计 1,452