简介

Replace the keyboard!!

  1. On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.
    • On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.

    添加评论

  2. Use the T6 Torx Screwdriver to remove all 4 screws.
    • Use the T6 Torx Screwdriver to remove all 4 screws.

    • You have to first remove the Stylus to access the 4th screw.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Using a plastic opening tool, carefully separate the front and back cases.

    • Note: The antenna will detach from the phone.

    添加评论

    • Using a T6 Torx Screwdriver, remove the two screws.

    • The motherboard will now be loose from the front case.

    添加评论

    • Using the spudger, flip open the clasp that holds the data ribbon in place.

    添加评论

    • Pull out the ribbon.

    • The keyboard will disconnect from the phone.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Clement Poisson

于2010年01月26日注册

24 信誉积分

创作了7篇指南

团队

Cal Poly, Team 13-23, Maness Winter 2010 Cal Poly, Team 13-23, Maness Winter 2010 的会员

CPSU-MANESS-W10S13G23

4 名成员

创作了16篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 3

总计 1,413