跳转到主内容

Palm TX Back Panel Replacement

你所需要的

  1. Palm TX Back Panel Replacement, Back Panel: 步骤 1 中的图像 1,2 Palm TX Back Panel Replacement, Back Panel: 步骤 1 中的图像 2,2
    • Orient the device so that the display faces forward.

    • Remove the stylus from the right side.

  2. Palm TX Back Panel Replacement: 步骤 2 中的图像 1,1
    • Turn over the device so that the back panel faces forward.

    • Use a T5 Torx screwdriver to remove the four 6.35mm corner screws.

  3. Palm TX Back Panel Replacement: 步骤 3 中的图像 1,2 Palm TX Back Panel Replacement: 步骤 3 中的图像 2,2
    • Rotate the device so that the display faces forward.

    • Insert a plastic opening tool with the angled tip pointing downward into the crevice on the left side of the device.

    • Pry along the crevice to loosen the back panel.

    • Repeat this process for the right side.

  4. Palm TX Back Panel Replacement: 步骤 4 中的图像 1,2 Palm TX Back Panel Replacement: 步骤 4 中的图像 2,2
    • Carefully pry the back panel to open the device.

    • Be careful not to break the wire that connects the battery pack to the motherboard.

    • When reassembling, snap the back panel back into place and then insert the top cover.

  5. Palm TX Back Panel Replacement: 步骤 5 中的图像 1,2 Palm TX Back Panel Replacement: 步骤 5 中的图像 2,2
    • Use a plastic opening tool to peel the battery pack from the back panel.

    • The battery pack is glued to the back panel so removing it may require considerable effort.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Spencer Lewson

于01/19/11注册

793 声望

创作了6篇指南

团队

Cal Poly, Team 1-15, Amido Winter 2011 Cal Poly, Team 1-15, Amido Winter 2011 的会员

CPSU-AMIDO-W11S1G15

4 名成员

创作了7篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 9

总计 1,539