配件

无需配件。

  1. Make sure your Palm Pre is turned off before disassembling the phone.
    • Make sure your Palm Pre is turned off before disassembling the phone.

    • Snap off the back panel to reveal the battery.

    添加评论

  2. Carefully pull up on the tab to remove the current battery.
    • Carefully pull up on the tab to remove the current battery.

    添加评论

  3. 订单满 $20 免运费
    结账时使用优惠码 BLUEANDBLACK
    订单满 $20 免运费
    使用优惠码 BLUEANDBLACK
    • Use the t4 screwdriver to remove all 6 of the 3.6mm long screws.

    添加评论

    • Use the spudger to locate the crease at the bottom of the keyboard.

    • Carefully work your way around the phone separating the back frame from the keyboard.

    添加评论

    • Use tweezers to remove the DIV and GPS antennas from the back of the keyboard.

    添加评论

    • Use the spuger to pry out the speaker. It is magnetically connected so do not be afraid to use the necessary force.

      • Make sure to take note of the orientation of the speaker for re-installation.

      • Make sure not the puncture the screen on the outside of the back frame.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

noha

于2012年04月12日注册

139 信誉积分

创作了6篇指南

团队

Cal Poly, Team 7-31, Maness Spring 2012 Cal Poly, Team 7-31, Maness Spring 2012 的会员

CPSU-MANESS-S12S7G31

3 名成员

创作了16篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 2

总计 1,063