修复你的物品 社区 商店

Palm Pre Speaker Replacement

已存档的指南
本指南只作为历史记录保留。请使用指南的最新版本来进行维修。

简介

This guide will show you how to readjust or replace the speaker if it is performing poorly.

你所需要的

  1. Palm Pre Speaker Replacement, Antenna: 步骤 1 中的图像 1，2 Palm Pre Speaker Replacement, Antenna: 步骤 1 中的图像 2，2

    • First the back panel must be removed to reveal the battery.

    • Remove the battery pack.

    编辑

  2. Palm Pre Speaker Replacement: 步骤 2 中的图像 1，2 Palm Pre Speaker Replacement: 步骤 2 中的图像 2，2

    • Remove the six T5 screws necessary to separate the backplate from the phone.

    • There is one screw in the upper right that is concealed by a small sticker labeled "Palm."

    • Additionally, there are interlocking tabs securing the back plate around the edges.

    • Use the opening tool to carefully go around the phone releasing these tabs.

    编辑

  4. Palm Pre Speaker Replacement: 步骤 3 中的图像 1，2 Palm Pre Speaker Replacement: 步骤 3 中的图像 2，2

    • Lift the metal flap marked in red to reveal the antenna connectors.

    • Carefully pry these the antennas from their connections, this can be done quite easily.

    • Take note of which colored wire is attached to each connection. The white wire corresponds to GPS, while the black wire corresponds to DIV, or diversity antenna.

    编辑

  5. Palm Pre Speaker Replacement, Speaker: 步骤 4 中的图像 1，3 Palm Pre Speaker Replacement, Speaker: 步骤 4 中的图像 2，3 Palm Pre Speaker Replacement, Speaker: 步骤 4 中的图像 3，3

    • With the backplate removed, the speaker is visible.

    • Pry out speaker with spudger.

    • It is magnetically attached so there should be a little bit of resistance; however, there are no wires to disconnect.

    • Take note of the orientation of the speaker for re-installation.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与6其他贡献者

iDeleted

于07/07/10注册

2,101 声望

创作了39篇指南

徽章: 9

+ 6更多徽章

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 302