跳转到主内容

当前版本的文档还未经巡查,您可以查看最新的已查核版本

你所需要的

  1. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 1 中的图像 1,1
    • Unscrew the three screws on the back of the Palm Pilot.

  2. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 2 中的图像 1,2 : 步骤 2 中的图像 2,2
    • Pull the back cover from the bottom of the device and separate the interlocking tabs on the top to remove the back cover.

  3. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 3 中的图像 1,1
    • The front plastic cover is now free to be removed from the rest of the device.

  4. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 4 中的图像 1,1
    • The keypad is now free to be removed from the rest of the device.

  5. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 5 中的图像 1,1
    • Looking at the back of the device hold one of the white tabs on the ribbon cable connector down and use tweezers to push in the other white tab toward the device at the same time.

  6. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 6 中的图像 1,1
    • The ribbon cable is now loose. Use the tweezers to carefully slide the ribbon cable out of the connector.

  7. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 7 中的图像 1,2 : 步骤 7 中的图像 2,2
    • The screen is now disconnected from the rest of the device and can now be removed.

  8. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 8 中的图像 1,2 : 步骤 8 中的图像 2,2
    • Depress the tabs around the battery casing so that the battery casing can slide through the rectangular slot on the motherboard - opposite of the metal plate.

  9. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 9 中的图像 1,2 : 步骤 9 中的图像 2,2
    • Pull/push the battery casing through the rectangular opening. The mother board should now separate from the plastic frame.

    • Note: The frame might have to be wiggled towards the left (when the springs are facing left) to become fully released.

终点

Kevin Santos

于03/09/12注册

1 声望

创作了4篇指南

团队

Clemson, Team 2-4, Benson Spring 2012 Clemson, Team 2-4, Benson Spring 2012 的会员

CLEM-BENSON-S12S2G4

3 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 1

总计 859