跳转到主内容

简介

This guide will teach you how to replace the flash bulb on the back of the phone.

  1. Push in the button at the bottom of the phone, and lift the back cap off.
    • Push in the button at the bottom of the phone, and lift the back cap off.

  2. Remove the battery by pulling out the little tab.
    • Remove the battery by pulling out the little tab.

  3. Using the 1.5mm hex screwdriver, remove the 6 hex screws from the inner-most casing.
    • Using the 1.5mm hex screwdriver, remove the 6 hex screws from the inner-most casing.

  4. Using the spudger, remove the inner case from the phone.
    • Using the spudger, remove the inner case from the phone.

  5. Using your spudger, slowly apply pressure on the bulb until it comes loose. Using your spudger, slowly apply pressure on the bulb until it comes loose.
    • Using your spudger, slowly apply pressure on the bulb until it comes loose.

结论

To reassemble your device, follow these instructions in reverse order.

ironwill13791

于2013年10月30日注册

509 信誉积分

创作了5篇指南

团队

UMass Dartmouth, Team 2-2, Gulbrandsen Fall 2013 UMass Dartmouth, Team 2-2, Gulbrandsen Fall 2013 的会员

UMASSD-GULBRANDSEN-F13S2G2

3 名成员

创作了10篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 140