Palm P101UNA Camera Screen Replacement

简介

The screen protects the camera from external damage, but in doing so can itself become damaged. This can be remedied by removing the screen and putting in a new one.

你所需要的

步骤 1 Battery

Palm P101UNA Camera Screen Replacement, Battery: 步骤 1 中的图像 1，1

Push in the button at the bottom of the phone, and lift the back cap off.

编辑

步骤 2

Remove the battery by pulling out the little tab.

编辑

步骤 3 Camera Screen

Palm P101UNA Camera Screen Replacement, Camera Screen: 步骤 3 中的图像 1，1

Using the 1.5mm hex screwdriver, remove the 6 hex screws from the inner-most casing.

编辑

步骤 4

Using the spudger, remove the inner case from the phone.

编辑

步骤 5

Now place your finger on the outside of the screen and slowly apply pressure.

编辑

步骤 6

While applying pressure, use your tweezers to remove the screen from the inner casing.

编辑

结论

To reassemble your device, follow these instructions in reverse order.

作者

与5其他贡献者

ironwill13791

于10/30/13注册

509 声望

创作了5篇指南

徽章: 5

+ 2更多徽章

团队

UMass Dartmouth, Team 2-2, Gulbrandsen Fall 2013 UMass Dartmouth, Team 2-2, Gulbrandsen Fall 2013 的会员

UMASSD-GULBRANDSEN-F13S2G2

3 名成员

创作了10篇指南

Palm P101UNA Camera Screen Replacement

简介

你所需要的

步骤 1 Battery

添加评论

步骤 2

添加评论

步骤 3 Camera Screen

添加评论

步骤 4

添加评论

步骤 5

添加评论

步骤 6

添加评论

作者

ironwill13791

团队

UMass Dartmouth, Team 2-2, Gulbrandsen Fall 2013 UMass Dartmouth, Team 2-2, Gulbrandsen Fall 2013 的会员

0条评论

添加评论

嵌入本指南

预览