简介

A guide to replace a damaged, lost, or broken button cluster.

Place the Palm IIIx face down on a flat surface.
  • Place the Palm IIIx face down on a flat surface.

添加评论

Push down, lift up on, and remove battery cover.
  • Push down, lift up on, and remove battery cover.

添加评论

Remove the old batteries one at a time.
  • Remove the old batteries one at a time.

添加评论

Using a Phillips #00 screwdriver, remove the four screws that hold the back cover in place.
  • Using a Phillips #00 screwdriver, remove the four screws that hold the back cover in place.

添加评论

Hold the device on its side, positioning your hands as shown.
  • Hold the device on its side, positioning your hands as shown.

  • Remove the back cover by pushing in with your thumbs and pulling outward with the rest of your fingers

添加评论

Hold the screen and front cover in a vertical position, facing the screen inward, as shown.
  • Hold the screen and front cover in a vertical position, facing the screen inward, as shown.

    • Position your hands so you can push the screen outward with your thumbs.

  • Remove the front cover by gently pushing outward with your thumbs. Use your index fingers to pull back on the front cover.

添加评论

Remove cluster by pulling on the rubber backing.
  • Remove cluster by pulling on the rubber backing.

    • Clean, repair, and/or replace as neccessary.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

David Haskell

于2010年01月21日注册

44 信誉积分

创作了3篇指南

团队

Cal Poly, Team 14-43, Regan Winter 2010 Cal Poly, Team 14-43, Regan Winter 2010 的会员

CPSU-REGAN-W10S14G43

5 名成员

创作了4篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 1

总计 1,188