简介

Follow this guide to learn how to replace your non-functioning button pad.

配件

无需配件。

Keep track of all pieces removed from the device.
  • Keep track of all pieces removed from the device.

  • Gently pull off the device cover. The cover snaps on and off easily where the cover attaches to the Palm IIIc device

添加评论

Using a Phillips head screw driver, take out the four screws on the back of the device. You may have to pull them out with your hands once they are unscrewed.
  • Using a Phillips head screw driver, take out the four screws on the back of the device. You may have to pull them out with your hands once they are unscrewed.

  • There will be two long screws and two short screws. The long screws come from the top of the device, and the short screws come from the bottom of the device.

添加评论

  • Lay Palm IIIc face-up and remove the front cover.

  • Do this firmly but not with too much force so as to not break or disturb anything you're not supposed to.

添加评论

  • Using a prying tool, carefully pop button pad out of the cover.

添加评论

  • Insert the new button pad where the old one used to be.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Paulina Trujillo

于2011年04月07日注册

241 信誉积分

创作了9篇指南

团队

Cal Poly, Team 20-69, Walters Spring 2011 Cal Poly, Team 20-69, Walters Spring 2011 的会员

CPSU-WALTERS-S11S20G69

5 名成员

创作了9篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 1

总计 1,234