跳转到主内容

简介

This guide will show you how to remove the top cover from a Packard Bell 4X4 desktop computer.

配件

没有特定配件。

  1. Using a Phillips screwdriver, remove the three Phillips head screws (circled in red) from the back of the computer.
    • Using a Phillips screwdriver, remove the three Phillips head screws (circled in red) from the back of the computer.

  2. With both hands on each side of the case, slide the top cover toward you. Lift it off the computer.
    • With both hands on each side of the case, slide the top cover toward you. Lift it off the computer.

  3. The top cover is removed.
    • The top cover is removed.

结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

Brandon S

于2010年09月04日注册

490 信誉积分

创作了3篇指南

团队

Packard Bell Planet Packard Bell Planet 的会员

Community

1 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 3

过去的30天: 9

总计 980