修复你的物品 社区 商店

Pacific Image Electronics CS3600 Bulb Panel Replacement

简介

Before you begin please be aware that you will be completely disassembling the device in order to get to the bulb inside. This will only require a Philips screw driver and able hands.

你所需要的

  1. Pacific Image Electronics CS3600 Bulb Panel Replacement, Bulb Panel: 步骤 1 中的图像 1，2 Pacific Image Electronics CS3600 Bulb Panel Replacement, Bulb Panel: 步骤 1 中的图像 2，2

    • Start by removing the 5 screws that are 5mm x 9mm located on the bottom of the device with a J1 screwdriver.

    编辑

  2. Pacific Image Electronics CS3600 Bulb Panel Replacement: 步骤 2 中的图像 1，1

    • Now that the screws have been removed, carefully but firmly open up the device at the seam until it is presented as shown.

    编辑

  3. Pacific Image Electronics CS3600 Bulb Panel Replacement: 步骤 3 中的图像 1，1

    • Use a J0 screwdriver to remove the following four screws that are 5mm x 9mm.

    编辑

  5. Pacific Image Electronics CS3600 Bulb Panel Replacement: 步骤 4 中的图像 1，1

    • Use the same J0 screwdriver to remove the following 3 screws that are 7mm x 6mm.

    编辑

  6. Pacific Image Electronics CS3600 Bulb Panel Replacement: 步骤 5 中的图像 1，1

    • Now grab the plastic cover you just removed screws from and gently remove it from the device.

    编辑

  7. Pacific Image Electronics CS3600 Bulb Panel Replacement: 步骤 6 中的图像 1，1

    • You may now pick up the plastic covering you removed screws from in Step 3 with ease revealing the bulb.

    编辑

  8. Pacific Image Electronics CS3600 Bulb Panel Replacement: 步骤 7 中的图像 1，1

    • Lodge the plastic opening tool underneath the bulb casing. Using some upward force, pop the bulb off the casing.

    编辑

  9. Pacific Image Electronics CS3600 Bulb Panel Replacement: 步骤 8 中的图像 1，1

    • You have now removed the bulb from the casing. Gently pull the wires forward and prepare a soldering station.

    编辑

  10. Pacific Image Electronics CS3600 Bulb Panel Replacement: 步骤 9 中的图像 1，1

    • Carefully desolder the 2 wires from their solder contact points to detach the bulb panel from the motherboard.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与5其他贡献者

Kristen Prince

于03/21/17注册

201 声望

创作了2篇指南

徽章: 5

+ 2更多徽章

团队

Texas Tech, Team S46-G2, Bennett Spring 2017 Texas Tech, Team S46-G2, Bennett Spring 2017 的会员

TTU-BENNETT-S17S46G2

3 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 2

总计 271