跳转到主内容

修复你的物品

维修的权力

商店

简介

Steps for replacing malfunctioned directional pads in a Sony PSP-3000

  1. Place the PSP face down and locate the battery cover on the left side of the device. Lift and remove the battery cover to reveal the battery. Remove the battery.
    • Place the PSP face down and locate the battery cover on the left side of the device.

    • Lift and remove the battery cover to reveal the battery.

    • Remove the battery.

  2. Peel back the warranty sticker that is behind the battery with a spudger or your fingernail.
    • Peel back the warranty sticker that is behind the battery with a spudger or your fingernail.

  3. Unscrew all four screws from the back of the PSP with the Phillips #00 Screwdriver. Two are located behind the battery's warranty sticker.
    • Unscrew all four screws from the back of the PSP with the Phillips #00 Screwdriver.

    • Two are located behind the battery's warranty sticker.

    • Two are located on the right side of the PSP.

  4. 跳过升级

    通过使用多合一工具包维修可以节省成本。

    购买 iPhone 维修工具套装

    跳过升级

    通过使用多合一工具包维修可以节省成本。

    购买 iPhone 维修工具套装
  5. Next, unscrew the two screws located at the top of the PSP.
    • Next, unscrew the two screws located at the top of the PSP.

  6. Then, remove the single screw from the bottom edge of the PSP (which is positioned next to the barcode).
    • Then, remove the single screw from the bottom edge of the PSP (which is positioned next to the barcode).

  7. Slide the spudger in between the outer casing of the PSP, beginning at the "R" shoulder button, and gently pry off the casing.
 Remove the front casing completely.
    • Slide the spudger in between the outer casing of the PSP, beginning at the "R" shoulder button, and gently pry off the casing.


    • Remove the front casing completely.

  8. Peal up the rubber pad that is securing the D-pad buttons to the backside of the front casing. Remove the D-pad and the rubber piece.
    • Peal up the rubber pad that is securing the D-pad buttons to the backside of the front casing.

    • Remove the D-pad and the rubber piece.

结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

mbnewsom

于2009年10月28日注册

2,765 信誉积分

创作了11篇指南

Is it for 2000?

Kaio Igor - 回复

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 8

过去的30天: 29

总计 6,769