PSP 300x Casing Replacement - iFixit 维修指南

简介

Steps for replacing the outer casing of a Sony PSP-3000.

你所需要的

步骤 1 Battery

PSP 300x Casing Replacement, Battery: 步骤 1 中的图像 1，3

PSP 300x Casing Replacement, Battery: 步骤 1 中的图像 2，3

PSP 300x Casing Replacement, Battery: 步骤 1 中的图像 3，3

Place the PSP face down and locate the battery cover on the left side of the device.
Lift and remove the battery cover to reveal the battery.
Remove the battery.

步骤 2 Casing

PSP 300x Casing Replacement, Casing: 步骤 2 中的图像 1，1

Peel back the warranty sticker that is behind the battery with a spudger or your fingernail.

步骤 3

PSP 300x Casing Replacement: 步骤 3 中的图像 1，2

PSP 300x Casing Replacement: 步骤 3 中的图像 2，2

Unscrew all four screws from the back of the PSP with the Phillips #00 Screwdriver.
Two are located behind the battery's warranty sticker.
Two are located on the right side of the PSP.

步骤 4

PSP 300x Casing Replacement: 步骤 4 中的图像 1，1

Next, unscrew the two screws located at the top of the PSP.

步骤 5

PSP 300x Casing Replacement: 步骤 5 中的图像 1，1

Then, remove the single screw from the bottom edge of the PSP (which is positioned next to the barcode).

步骤 6

PSP 300x Casing Replacement: 步骤 6 中的图像 1，2

PSP 300x Casing Replacement: 步骤 6 中的图像 2，2

Slide the spudger in between the outer casing of the PSP, beginning at the "R" shoulder button, and gently pry off the casing. 
Remove the front casing completely.

结论

To reassemble your device, follow these instructions in reverse order.

25等其他人完成本指南。

作者

与15其他贡献者

kbrunner

于11/05/09注册

72 声望

撰写一个指南

+ 8更多徽章

团队

Cal Poly, Team 19-2, Maness Fall 2009 Cal Poly, Team 19-2, Maness Fall 2009 的会员

CPSU-MANESS-F09S19G2

3 名成员

创作了10篇指南

0条评论

浏览统计数据:

过去 24 小时： 10

过去 7 天： 70

过去 30 天： 288

总计 16,000