简介

Steps for replacing the outer casing of a Sony PSP-3000.

Place the PSP face down and locate the battery cover on the left side of the device.
  • Place the PSP face down and locate the battery cover on the left side of the device.

  • Lift and remove the battery cover to reveal the battery.

  • Remove the battery.

添加评论

Peel back the warranty sticker that is behind the battery with a spudger or your fingernail.
  • Peel back the warranty sticker that is behind the battery with a spudger or your fingernail.

添加评论

  • Unscrew all four screws from the back of the PSP with the Phillips #00 Screwdriver.

    • Two are located behind the battery's warranty sticker.

    • Two are located on the right side of the PSP.

添加评论

  • Next, unscrew the two screws located at the top of the PSP.

添加评论

  • Then, remove the single screw from the bottom edge of the PSP (which is positioned next to the barcode).

添加评论

  • Slide the spudger in between the outer casing of the PSP, beginning at the "R" shoulder button, and gently pry off the casing.


  • Remove the front casing completely.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

16等其他人完成本指南。

kbrunner

于2009年11月05日注册

29 信誉积分

撰写一个指南

团队

Cal Poly, Team 19-2, Maness Fall 2009 Cal Poly, Team 19-2, Maness Fall 2009 的会员

CPSU-MANESS-F09S19G2

3 名成员

创作了3篇指南

添加评论

浏览统计数据:

过去的24小时: 4

过去的7天: 19

过去的30天: 80

总计 6,956