修复你的物品 社区 商店

PS3 Dual Shock 3 Controler Charging Port Replacement

简介

To complete this repair, the user must possess skills in soldering, and proper tools needed to perform the repair.

你所需要的

  1. PS3 Dual Shock 3 Controler Charging Port Replacement, Opening the Controller: 步骤 1 中的图像 1，1

    • Remove the 5 screws on the back of the controller.

    • The back housing of the controller can now be removed.

    编辑

  2. PS3 Dual Shock 3 Controler Charging Port Replacement, Removing the Battery: 步骤 2 中的图像 1，1

    • Remove battery by unlatching the battery cables from battery connector clip.

    编辑

  3. PS3 Dual Shock 3 Controler Charging Port Replacement, Freeing the Motherboard: 步骤 3 中的图像 1，1

    • Remove the two screws holding the motherboard to the front controller housing.

    • Next, remove the motherboard assembly from the controller housing. This is done by pressing in the clips on each side of the handle.

    • Freeing the motherboard from the housing will provide better access to the charging port.

    编辑

  5. PS3 Dual Shock 3 Controler Charging Port Replacement, Preparing the Soldering Station: 步骤 4 中的图像 1，1

    • Prepare your station for the de-soldering of the charging port.

    编辑

  6. PS3 Dual Shock 3 Controler Charging Port Replacement, Desoldering: 步骤 5 中的图像 1，3 PS3 Dual Shock 3 Controler Charging Port Replacement, Desoldering: 步骤 5 中的图像 2，3 PS3 Dual Shock 3 Controler Charging Port Replacement, Desoldering: 步骤 5 中的图像 3，3
    在这个步骤中使用的工具：
    Desoldering Pump
    $3.99
    购买

    • To remove the defective charging port, you will need to de-solder the 9 pins holding the port to the motherboard.

    • First, used the desoldering pump to remove the solder from all 9 pins.

    • Then, use the desoldering wick to remove any excess solder left on the motherboard.

    编辑

  7. PS3 Dual Shock 3 Controler Charging Port Replacement, Securing New Charging Port: 步骤 6 中的图像 1，1

    • After the charging port is removed, place the new charging port into position.

    • Hold the new port in place by using a clip to keep it from moving.

    编辑

  8. PS3 Dual Shock 3 Controler Charging Port Replacement, Soldering The New Port: 步骤 7 中的图像 1，2 PS3 Dual Shock 3 Controler Charging Port Replacement, Soldering The New Port: 步骤 7 中的图像 2，2

    • Tin the soldering iron before soldering the connections. This is done by applying a small amount of solder to the tip of the hot iron.

    • Solder the 9 pin connections that connect the charging port to the motherboard.

    编辑
结论

To reassemble your device, follow instructions 1-3 in reverse order.

15等其他人完成本指南。

作者

与3其他贡献者

Attak

于12/04/17注册

595 声望

撰写一个指南

徽章: 8

+ 5更多徽章

5条评论

Shall DualShock3 require other than GND and VBUS for charging only

and does DS3 follow the standards of USB-miniB (eg: Data wires flipping).

Sony does have some fame to sacrifice standards over extra capability delivery.

JanLS - 回复

Would you guys happen to know, if my labeling is correct? I’m going to upgrade to USB-C.

https://imgur.com/a/RL68Yw5

Howling Beats - 回复

Thank you it's really useful, tips,

Alan - 回复

Thanks for this. But now there are four different USB charging ports, how to tell which one of them is suitable? kasynparts eg

kasynlife - 回复

please attak if you still using this platfrom i really need you to help me with a ps3 controller pins

Deyaa Alshapshiri - 回复

添加评论

浏览统计数据:

过去 24 小时： 9

过去 7 天： 60

过去 30 天： 315

总计 17,040