修复你的物品 社区 商店

Otium Bluetooth Headphones Battery Replacement

简介

The Otium Bluetooth Headphones are rated for 500 charge cycles. If your headphones will not hold charge, or charge at all, you may need to replace the battery.

你所需要的

    • Power off your earbuds first.

    • Use a pry tool to unclip the cover of the left earbud.

    编辑

  2. Otium Bluetooth Headphones Battery Replacement: 步骤 2 中的图像 1，2 Otium Bluetooth Headphones Battery Replacement: 步骤 2 中的图像 2，2

    • Carefully remove the battery from the housing.

    • The battery is connected by two fragile wires.

    • Shown is a 3.7v 100mAh Lithium Polymer (LiPo) battery.

    编辑

  4. Otium Bluetooth Headphones Battery Replacement: 步骤 3 中的图像 1，2 Otium Bluetooth Headphones Battery Replacement: 步骤 3 中的图像 2，2

    • Carefully peel back the rubber cover from the protection circuit module (PCM).

    • Remove the cover and save to re-use.

    • The rubber is attached using Kapton tape and hot glue.

    编辑

  5. Otium Bluetooth Headphones Battery Replacement: 步骤 4 中的图像 1，2 Otium Bluetooth Headphones Battery Replacement: 步骤 4 中的图像 2，2

    • Carefully bend the PCM away from the battery to make desoldering the two wires easier.

    编辑

    • Use a soldering iron to desolder the two wires from the PCM.

    • Adding a JST connector would make future repairs much easier!

    • Recycle your old battery!

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与1其他贡献者

Geralt

于11/28/14注册

1,795 声望

创作了2篇指南

徽章: 16

+ 13更多徽章

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 10

过去 30 天： 49

总计 769