跳转到主内容

简介

The circuit board is the main control center of the blender.

  1. Use the prying tools to open the four plastic screw holes on the bottom of the blender.
    • Use the prying tools to open the four plastic screw holes on the bottom of the blender.

  2. Use the Phillips #1 Screwdriver to unscrew the four 16 mm screws and remove the plastic bottom.
    • Use the Phillips #1 Screwdriver to unscrew the four 16 mm screws and remove the plastic bottom.

  3. Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物

    Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物
  4. Gently remove the circuit board.
    • Gently remove the circuit board.

  5. Use the spudger to detach the black wire from the circuit board. Repeat for yellow wire.
    • Use the spudger to detach the black wire from the circuit board.

    • Repeat for yellow wire.

  6. Use the Phillips #1 to remove the four 8mm screws. Use the medal spudger to detach the circuit board from the buttons. Gently pull and release circuit board from buttons.
    • Use the Phillips #1 to remove the four 8mm screws.

    • Use the medal spudger to detach the circuit board from the buttons.

    • Gently pull and release circuit board from buttons.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Tristian Cruz

于2017年09月20日注册

263 信誉积分

创作了2篇指南

添加评论

浏览统计数据:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 4

总计 112